Name: Knipex 77 02 120 H Electrical & precision engineering Side cutter non-flush type 120 mm
Brand: Knipex
SKU: 1008221
Availability: InStock

All things technology
Delivery within Europe
Right to Cancel applies
Specialist retailer since 1923

Side-cutting pliers made of steel with red and blue handles. Text on the handles: 'KNIPEX Germany', 'hard max 0.1 Piano max 0.6 mm'.

An electronic circuit board with resistors, ICs and capacitors. A red pair of pliers carefully grasps a yellowish resistor.

A green circuit board with blue resistors, microprocessors, and a yellow capacitor. A red pair of pliers is holding a component.

Side cutters with red-blue handle, model number '77 02 120 H', suitable for hard wires up to 1.0 mm and piano wire up to 0.6 mm.

Side cutters with red and blue handle, manufactured in Germany. Suitable for cutting wires up to 1.0 mm.

1/5

Dispatches on Fri 30 Oct

10 Piece(s)

Sales and shipping:

Conrad ElectronicTerms & Conditions

Number

Piece(s)

Total (€ 114.99 / piece)

€ 114.99

incl. VAT

Only 10 Piece(s) available

14-day return policy included

Report legal concerns

Highlights & Details

Electronics side cutter 120 mm

For extreme demands on-cutting pliers thanks to hard or viscous materials, e.g. Piano, Nickel, tungsten and diode wire as you are increasingly in the electronics and aerospace industry can be used
Always the right cutting tool, even in the hardest material
Precision hard metal cut soldered in forged blanks
Stable box joint free from play
Cutting hardness of the carbide cutting 8-83 HRC

Technical specifications

Product type: Side cutter

Manufacturer part #: 77 02 120 H

Range of use: Electrical & precision engineering

Length: 120 mm

Material: Carbide metal

Material properties: polishing

Edge hardness: 83 HRC

Wire hardness (max.) soft wire: 2 mm

Wire hardness (max.) medium wire: 1.4 mm

Wire hardness (max.) hard wire: 1.0 mm

Wire hardness piano wire (max.): 0.6 mm

Width: 50 mm

Weight: 85 g

Features: non-flush type

Type: With carbide cutting

Type: 77 02 120 h

UKCA: not relevant

Documents & Downloads

User & Safety Instructions

User & Safety Instructions 1008221 Knipex 77 02 120 H Electrical & precision engineering Side cutter non-flush type 120 mm

Description

Stable box joint free from play For extreme demands on-cutting pliers thanks to hard or viscous materials, e.g. Piano, Nickel, tungsten and diode wire as you are increasingly in the electronics and aerospace industry. Always the right cutting tool, even in the toughest conditions material. Precision hard metal cut soldered in forged blanks. Cutting hardness of the carbide cutting 80 - 83 HRC. Pliers with hard metal cut have a much longer life than those with conventional cutting. Permanently reliable cutting results by avoiding cutting deformations due to overload. High cost-savings through longer service life of pliers.

This text is machine translated.

Features

Mirror Polished
Grips with multi-component sleeves
for extreme demands on-cutting pliers thanks to hard or viscous materials, e.g. Piano, Nickel, tungsten and diode wire as you are increasingly in the electronics and aerospace industry can be used
Always the right cutting tool, even in the hardest material
Precision hard metal cut soldered in forged blank discs
Stable box joint free from play
Cutting hardness of 80 - 83 HRC
pliers with HM-cutting hard metal cut have a much longer life than those with conventional cutting
permanently reliable cutting results by avoiding cutting deformations due to overload
High Cost savings due to a longer service life of the pliers
Grips Electrically discharging design - dissipative.

Hints

This text is machine translated.

Description

Features

Mirror Polished
Grips with multi-component sleeves
for extreme demands on-cutting pliers thanks to hard or viscous materials, e.g. Piano, Nickel, tungsten and diode wire as you are increasingly in the electronics and aerospace industry can be used
Always the right cutting tool, even in the hardest material
Precision hard metal cut soldered in forged blank discs
Stable box joint free from play
Cutting hardness of 80 - 83 HRC
pliers with HM-cutting hard metal cut have a much longer life than those with conventional cutting
permanently reliable cutting results by avoiding cutting deformations due to overload
High Cost savings due to a longer service life of the pliers
Grips Electrically discharging design - dissipative.