• All things technology
  • Delivery within Europe
  • Right to Cancel applies
  • Specialist retailer since 1923
Start
DIY & ToolsHand ToolsPliersCrimpers

Knipex 97 53 14 Crimper Ferrules 0.08 up to 16 mm²

EAN:
Part number:
Item no:
Crimping pliers with red and blue handles, brand name 'KNIPEX', suitable for cable sizes 0.08–2.0 mm²/AWG 28–2x8, manufactured in Germany.
Crimping pliers with red and blue handles, brand name 'KNIPEX', suitable for cable sizes 0.08–2.0 mm²/AWG 28–2x8, manufactured in Germany.
Red and blue crimping pliers by Knipex, Model 97 53 14, manufactured in Germany.
Crimping pliers with red and blue handle, brand "Knipex", model number 97 53 14, suitable for cable sizes 0.08-2x10 mm²/AWG 28-2x8.
Knipex crimping pliers with red and blue handles, suitable for crimping cable connections. The tool type and model number are visible.
A person is using a red and blue crimping tool to press a metal piece with a clip. The hand and tool are visible.
A red crimping pliers holds a blue cable. The pliers are shown in close-up, revealing the crimping mechanism in detail.
A person is holding a crimping tool about to process an electrical cable. The tool displays the marking 'KNIP'.
A person is using a red wire stripping pliers to work on the ends of two black cables. The pliers are removing the insulation.
A hand is holding a red and blue crimping pliers. A red cable is being inserted into the pliers to crimp a metal cable lug.
A hand is holding a red crimping pliers working on a wire with a metal connector.
A hand tool with a red and blue handle is gripping the end of a yellow insulated cable, suitable for electrical work.
A red and blue crimping pliers is crimping a yellow and green cable used for electrical connections.
A pair of red Knipex crimping pliers are being held in hand, ready to crimp a cable.
A hand is holding a crimping plier that is squeezing an electrical cable. The pliers are black and red, with a blurred background.
A pair of wire strippers crimping a yellow-green cable wire, close-up. Tool hinges and screw visible, background blurred.
Close-up of a bicycle crank bolt with a torque wrench set to 10 newton-metres, against a blurred background.
A hand holds a red crimping pliers against a blue cable. The pliers are positioned on a hexagonal connector.
A red and blue crimping pliers lie on a table, surrounded by cable lugs. A blurred electrical panel is visible in the background.
A hand is holding a red crimping plier that is working on a cable. In the background, an electrical cabinet with cables can be seen.
A hand is holding a red crimping pliers and clamping a metal connector with a cable in a technical laboratory or workshop environment.
A red and blue crimping pliers secures a yellow-green electrical cable end ferrule in a workshop.
A crimping plier presses cable connectors onto insulated wires. In the background, an electrical switchboard setup.
1/23
Datasheet (PDF)
Fast track dispatch on Tue 27 Oct
304 Piece(s)
Sales and shipping:
Conrad ElectronicTerms & Conditions
Number
Total (€ 154.99 / piece)
€ 154.99
prav.tax.untaxed incl. VAT 
plus € 19.99 
prav.priceAvailability.ecoparticipation.cost ...
prav.priceAvailability.privatecopyingfee.cost ...
without further shipping costs 
14-day return policy included
Report legal concerns

Highlights & Details

Self-setting crimping pliers for wire-end sleeves with side introduction

  • Lower grip widthReliable hexagonal pressing of wire end sleeves from 0.08 to 16 mm² (AWG 6) via reversing lever and all twin cable end sleeves up to 2 x 10 mm² (AWG 2 x 8)Hexagonal crimping for cramped connection dimensionsFor pressing of wire end sleeves DIN 46228 Part 1 + 4Self-adjusting to the desired core sleeve size
  • Two schematic drawings of bushings: At the top, a cylindrical shape with an open side; below, a straight form with a closed underside.

Technical specifications

  • Number of cavities: 1 pcs.
Product type

Crimper

Manufacturer part #

97 53 14

Range of uses

Ferrules

Crimp area

0.08 up to 16 mm²

Crimp area AWG

8 up to 28 awg

Crimp area (min.)

0.08 mm²

Crimp area (max.)

16 mm²

Crimp area AWG (min.)

28 awg

Crimp area AWG (max.)

8 awg

Length

180 mm

Material

Chromium-vanadium electric furnace steel

Material properties

burnished

tempered

Width

75 mm

Height

21 mm

Weight

445

Factory colour

Multicolour

Type

** Only with the introduction page

Suitable for

Wire-end sleeves

Type

97 53 14**

UKCA

yes

Documents & Downloads

Datasheet

Datasheet 822459 Knipex 97 53 14 Crimper Ferrules 0.08 up to 16 mm²

User & Safety Instructions

User & Safety Instructions 822459 Knipex 97 53 14 Crimper Ferrules 0.08 up to 16 mm²

Description

97 53 14 Self-adjusting crimping pliers for wire-end sleeves with reduced grip. For pressing of wire end sleeves DIN 46228 Part 1 + 4 Self-adjusting to the desired core sleeve size. consistently high crimping quality through locking device (can be unlocked) Crimp-pressure is set precisely ex-factory (calibrated) Power strengthening through lever transmission for fatigue-free working High user comfort through handy design and low weight. Approved crimping according to UL in conjunction with the KNIPEX-AEH 97 99 330 – 399. UL approval in conjunction with KNIPEX-EH 97 99 330 – 399. Reliable hexagonal pressing of wire end sleeves from 0.08 to 16 mm² (AWG 6) using a changeover lever and all twin wire end sleeves up to 2 x 10 mm² (AWG 2 x 8). Hexagonal crimping for cramped connection dimensions. - Application: Wire end sleeves - Capacity square millimeters: 0.08 — 16mm² - Number of nests: 1 - AWG: 28 — 8.

This text is machine translated.

Features

  • consistently high crimping quality through locking device (can be unlocked)
  • high usage comfort through handy design and low weight
  • Power strengthening through lever transmission for fatigue-free working
  • Crimp-pressure is set precisely ex-factory (calibrated)
  • lateral introduction of wire-end sleeves in the tool
  • for solder-free electrical connections
  • For pressing of wire end sleeves DIN 46228 Part 1 + 4
  • Hexagonal crimping for cramped connection dimensions
  • Easy handling through self-setting to the sleeve size
  • Chromium-vanadium electro-steel in special quality, oil-hardened
  • Browned pliers, grips with multi-component covers
  • 97
  • Hexagonal crimping for cramped connection dimensions.

Frequently Bought Together

(*All information is plus legal VAT)
Total price:

€ 398.96*

Accessories

(*All information is plus legal VAT)

The necessary accessories are required to use the article as described.

More interesting products

(*All information is plus legal VAT)