Name: Monacor SAM-2 Built-in amplifier 200 W
Brand: Monacor
SKU: 1332519
Availability: InStock

A printed circuit board with various electronic components such as inductors, resistors, and capacitors on a black base.

Technical drawing of a SAM-2 device with dimensions: total width 370 mm, height 186 mm; includes details of internal components.

1/3

Dispatches on Thu 29 Oct

10 Piece(s)

Sales and shipping:

Conrad ElectronicTerms & Conditions

Number

Piece(s)

Total (€ 405.00 / piece)

€ 405.00

incl. VAT

Only 10 Piece(s) available

14-day return policy included

Report legal concerns

Technical specifications

Music output power 4 ohms: 250WMAX
Music output power 8 ohms: 180WMAX
The non-linear distortion factor for the sine power: 70 dB
Quiescent power consumption: 19 VA
Standby-power consumption 6 VA
The stand-by mode-delay: approx. 7 minutes
Power supply 230 VWechsel/50 Hz/300 VA
Cut-out: 155 x 340 mm required boxes
Installation depth without front plate: 85 mm
Automatic start-up

Product type: Built-in amplifier

Power per channel (4Ω): 200 W

Power per channel (8Ω): 125 W

Dim: (W x H x D) 185 x 370 x 90 mm

Weight: 5.75 kg

Width: 185 mm

Height: 370 mm

Depth: 90 mm

Documents & Downloads

User & Safety Instructions

User & Safety Instructions 1332519 Monacor SAM-2 Built-in amplifier 200 W

Features

Impressive building blocks for the optimum bass the proven design of this active subwoofer module provides the high-quality transistor technology for a convincing warm sound of the built-in subwoofer box. Equipment and the processing of the modules leave nothing to be desired. SAM-1 and SAM-2 have great dynamics reserves. Active subwoofer module, 250WMAX, 125WRMS
High-performance active component
Subsonic filter 24dB
Variable low-pass 50-150 Hz (18 dB)
Semi-parametric Bass Boost (variable 30-50 Hz center frequency with infinitely variable increase up to 6 dB)
Infinitely variable phase shift 0 to -180° to compromise room setup and adjustment
Variable high-pass 50-150 Hz (12 dB) for bass relief of the sat-verstarkers and Sat-Lautsprecher
Ground-lift switch from the studio technology against humming noise
Various protection circuits against short-circuit, overheating and DC
Perfect drive for bass up to 46 cm diameter
VerarbeitungDer convincing sound and high-quality, active high-pass of the SAM-2 with its setting options can be comfortably for bass relief of the main loudspeakers and for sound optimization can be used. The prerequisite for this, however, is a regular pre-amplifier output (pre-out) in the system, as it partly in high-quality aufspaltbaren monitored is present (pre-out/Main-In) or how at vor-endstufenkombinationen or use of mixers automatically. Klang+Ton 02/2013 SPH-10 M, MSH-115 HQ, SR and SAM-2 in the kit 2 RBT connects you-95 DOT1a very nice to review system, already plays. . The adaptability of the kit is phenomenal and the adjustment possibilities almost infinite. . . Unbelievably suitable for everyday use, comes with every kind of music and is home theater-compatible. In our listening room staunten we not bad, as we the system to the test. The small speaker had there, as if you were the whole bass share. The Subwoofer simply wasn't. The tactics with the tile is full. . It jiggle nothing, although a powerful, powerful bass in the room. The satellites themselves playing with a corresponding portion of air and fine resolution.
This text is machine translated.

Description

Features

Impressive building blocks for the optimum bass the proven design of this active subwoofer module provides the high-quality transistor technology for a convincing warm sound of the built-in subwoofer box. Equipment and the processing of the modules leave nothing to be desired. SAM-1 and SAM-2 have great dynamics reserves. Active subwoofer module, 250WMAX, 125WRMS
High-performance active component
Subsonic filter 24dB
Variable low-pass 50-150 Hz (18 dB)
Semi-parametric Bass Boost (variable 30-50 Hz center frequency with infinitely variable increase up to 6 dB)
Infinitely variable phase shift 0 to -180° to compromise room setup and adjustment
Variable high-pass 50-150 Hz (12 dB) for bass relief of the sat-verstarkers and Sat-Lautsprecher
Ground-lift switch from the studio technology against humming noise
Various protection circuits against short-circuit, overheating and DC
Perfect drive for bass up to 46 cm diameter
VerarbeitungDer convincing sound and high-quality, active high-pass of the SAM-2 with its setting options can be comfortably for bass relief of the main loudspeakers and for sound optimization can be used. The prerequisite for this, however, is a regular pre-amplifier output (pre-out) in the system, as it partly in high-quality aufspaltbaren monitored is present (pre-out/Main-In) or how at vor-endstufenkombinationen or use of mixers automatically. Klang+Ton 02/2013 SPH-10 M, MSH-115 HQ, SR and SAM-2 in the kit 2 RBT connects you-95 DOT1a very nice to review system, already plays. . The adaptability of the kit is phenomenal and the adjustment possibilities almost infinite. . . Unbelievably suitable for everyday use, comes with every kind of music and is home theater-compatible. In our listening room staunten we not bad, as we the system to the test. The small speaker had there, as if you were the whole bass share. The Subwoofer simply wasn't. The tactics with the tile is full. . It jiggle nothing, although a powerful, powerful bass in the room. The satellites themselves playing with a corresponding portion of air and fine resolution.
This text is machine translated.