PFERD TOOLS 25203590 SPB DIN 338 HSSG N 1,7 STEEL HSS-G N Twist drill bit 1.7 mm Total length 43 mm DIN 338 10 pc(s)
Product type
Twist drill bit
Drill hole Ø
1.7 mm
Content
10 pc(s)
Material
HSS-G N
Material suitability
Metal
EAN:
Part number:
Item no:
Highlights & Details
PFERD spiral drill STEEL Ø 1.7 mm HSS-G N DIN 338 118° universal
- Universally suitable for steel, cast steel, cast iron, cast iron, bronze, Brass, aluminum
- Easy centering
- Long tool life
- Excellent chip removal
- High run-out accuracy
- Precise centering and low thrust force thanks to cross-grinding
Technical specifications
- Spiral angle 25° to 30°
- RPM of, gray cast iron, white cast iron: 1873 RPM
- RPM of, hard non-ferrous metals: 4683 RPM
- RPM of soft non-ferrous metals: 5620 RPM
- RPM of, steels above 700 N/mm²: 3747 RPM
- RPM of, steels up to 700 N/mm²: 4683 RPM
- RPM of, thermoplastic plastics, fiber-reinforced plastics (GRP/CFK): 2810 RPM
- RPM bis, gray cast iron, white cast iron: 4683 RPM
- RPM to, hard non-ferrous metals: 9367 RPM
- RPM bis, soft non-ferrous metals: 11240 RPM
- RPM bis, steels above 700 N/mm²: 4683 RPM
- RPM bis, steels up to 700 N/mm²: 6557 RPM
- RPM to, thermopl. Synthetic, fiber-optic. PLASTICS (GRP/CFK) 7493 RPM
- Product type
Twist drill bit
- DIN standard
DIN 338
- Type
STEEL
- Drill hole Ø
1.7 mm
- Tip angle
118°
- Content
10 pc(s)
- Material
HSS-G N
- Material properties
M2
- Material suitability
Metal
- Tensile strength (max.)
1.200 N/mm²
- Working length
20 mm
- Total length
43 mm
- UKCA
not relevant
Documents & Downloads
User & Safety Instructions
User & Safety Instructions 3047152 PFERD TOOLS 25203590 SPB DIN 338 HSSG N 1,7 STEEL HSS-G N Twist drill bit 1.7 mm Total length 43 mm DIN 338 10 pc(s)
Information
Information 3047152 PFERD TOOLS 25203590 SPB DIN 338 HSSG N 1,7 STEEL HSS-G N Twist drill bit 1.7 mm Total length 43 mm DIN 338 10 pc(s)
Information 3047152 PFERD TOOLS 25203590 SPB DIN 338 HSSG N 1,7 STEEL HSS-G N Twist drill bit 1.7 mm Total length 43 mm DIN 338 10 pc(s)
Description
Drilling tools with cross-grinding for industrial applications Fully ground, right-rotating versions, which generate precise drill holes thanks to their high concentricity and exact centering. Twist drill bits offer PFERD in the STEEL (118° tip angle) and INOX (135° tip angle) versions. High-performance drilling tools in the execution STEEL in HSSG (M2) for industrial applications. Fully ground right-hand cut design with cross polished section, which produces accurate boreholes thanks to its high concentricity and exact centering.
Application recommendations
Observe the recommended speeds.
If possible, use high-quality cutting oil or cooling lubricant when drilling metals. This promotes smooth running and extends the lifetime of the drill. Exception: Apply petroleum instead of cutting oil when machining aluminum.
To prevent corrosion, remove the particles from the workpiece when machining stainless steel (INOX). Clean the workpiece chemically or mechanically (etching/polishing, etc.).
Materials
Aluminium
Cast iron
Black temperature casting (GTS, GJMB)
Brass
Bronze
Non-alloy steel
Cast iron
Cast steel
Crust
Plywood
Copper
Ductile cast iron
Duroplast
Elastomers
Fibre-reinforced thermoplastics (GRP, CFK)
Fibre-reinforced thermoset plastic (GFK, CFK) fiber share ≤ 40 %
Fibre-reinforced thermoset plastic (GRP, CFK) greater/40% fiber content
Grey-iron (GG/GJL, GGG/GJS)
Non-ferrous metal, hard
Hard wood
Other non-ferrous metals
Miscellaneous
Synthetic/plastics
Rolling and ball bearing steels
Non-ferrous metal, soft
Soft titanium alloys (tensile strength 500 N/mm²)
Soft wood
Steel
Steel, cast steel
Steel up to 1,200 N/mm² (less than 38 HRC)
Steel over 700 N/mm² (greater than 220 HB)
Steels up to 700 N/mm² (less than 220 HB)
Thermoplastic
Titanium
Titanium alloys
Tool steels
White malleable iron (GTW, GJMW)
Timber
Zinc
Applications
drilling;
Drive types
Bench drill
Machine tool
Core-drilling machine
Robots
Stationary machines
This text is machine translated.
Application recommendations
Observe the recommended speeds.
If possible, use high-quality cutting oil or cooling lubricant when drilling metals. This promotes smooth running and extends the lifetime of the drill. Exception: Apply petroleum instead of cutting oil when machining aluminum.
To prevent corrosion, remove the particles from the workpiece when machining stainless steel (INOX). Clean the workpiece chemically or mechanically (etching/polishing, etc.).
Materials
Aluminium
Cast iron
Black temperature casting (GTS, GJMB)
Brass
Bronze
Non-alloy steel
Cast iron
Cast steel
Crust
Plywood
Copper
Ductile cast iron
Duroplast
Elastomers
Fibre-reinforced thermoplastics (GRP, CFK)
Fibre-reinforced thermoset plastic (GFK, CFK) fiber share ≤ 40 %
Fibre-reinforced thermoset plastic (GRP, CFK) greater/40% fiber content
Grey-iron (GG/GJL, GGG/GJS)
Non-ferrous metal, hard
Hard wood
Other non-ferrous metals
Miscellaneous
Synthetic/plastics
Rolling and ball bearing steels
Non-ferrous metal, soft
Soft titanium alloys (tensile strength 500 N/mm²)
Soft wood
Steel
Steel, cast steel
Steel up to 1,200 N/mm² (less than 38 HRC)
Steel over 700 N/mm² (greater than 220 HB)
Steels up to 700 N/mm² (less than 220 HB)
Thermoplastic
Titanium
Titanium alloys
Tool steels
White malleable iron (GTW, GJMW)
Timber
Zinc
Applications
drilling;
Drive types
Bench drill
Machine tool
Core-drilling machine
Robots
Stationary machines
This text is machine translated.
Hints
Use eye protection!
Observe safety recommendations!
What kind of Metal Drill Bits are you looking for?
Accessories
(*All information is plus legal VAT)The necessary accessories are required to use the article as described.
