Remote switch 1.5 mm² Schneider Electric A9A26916

This electrical accessory from Acti9 is a changeover contact (normally open contact/normally closed contact) for displaying the position of the circuit breaker in the event of an electrical fault or tripping. Operating current is between 2mA and 100mA at a frequency of 50Hz to 60Hz at 24VAC to 240VAC & 24VDC to 220VDC. Fault, signal contact. For installation in small businesses, buildings, critical infrastructure, healthcare, industry, in data centers. This electrical accessory is compatible with Acti9 products such as iC60 dual terminal and iID dual terminal. The ISD is used for either the device short name or the compatibility code. The mechanical display is provided on the product for signaling (Local). Screw terminal connection on the top side. The connection permits rigid copper cables. The cable cross-section ranges from 1mm² to 4mm². The ISD is used for either the device short name or the compatibility code. The mechanical display is provided on the product for signaling (Local). The connection is made with a screw terminal on the top. The connection is suitable for rigid copper cables. The cable cross-section ranges from 1mm² to 4mm². Screw terminal connection at top allows a cable cross-section of 0.5 mm² to 2.5 mm² with flexible copper cables. Screw terminal connection on the top side. The connection permits rigid copper cables. The cable cross-section of 2 cables allows a cable cross-section of 2.5 mm². It has a screw-clamp connection on the top side. Connection is possible flexibly with wire-end sleeve copper cables (2 cables). The cable cross-section is 1.5 mm². The rated insulation voltage (UI) is up to 500 V. The rated surge voltage (Uimp) is 4kV. The width in 9 mm pitch is 1. The dimensions are (W) 9 mm x (H) 86 mm x (D) 73 mm. The color of the product is white (RAL 9003). The degree of contamination is 3. The degree of tropical fitness is treatment 2. The tightening torque of the connection is 1N.m (above) for the screwdriver type PZ1. In accordance with the standard IEC 60529, the IP protection class is IP20. The operating temperature is between -25°C and +70°C. The storage temperature ranges from -40°C to +85°C. This product complies with the standards EN/IEC 60947-5-1 and EN/IEC 60947-5-4. This product is certified with LCIE, ASEFA, KEMA and ASTA marks.

This text is machine translated.