Revell 39621 Model making - solvent Glass container Content 100 ml
EAN:
Part number:
Item no:
Number
Total (1 l = € 94.90)
€ 9.49
incl. VAT
14-day return policy included
Highlights & Details
REVELL Aqua Color Mix 100 ml
- Thinner and drying delayer
Technical specifications
- Product type
Model making - solvent
- Container
Glass container
- Content
100 ml
- Model
Aqua Color Mix
Documents & Downloads
Security datasheet
Security datasheet 208719 Revell 39621 Model making - solvent Glass container Content 100 ml
Signal word
Attention
GHS / H Statements
- H 226: Flammable liquid and vapour
- H 319: Causes serious eye irritation
GHS / P Statements
- P 102: Keep away from children
- P 210: Keep away from heat/sparks/open flames/hot surfaces – No smoking
- P 260: Do not inhale dust/fume/gas/mist/vapours/spray
- P 262: Avoid contact with eyes, skin, and clothes
- P 303+361+353: SKIN/HAIR CONTACT: Remove contaminated clothing immediately. Rinse skin with water/shower
- P 305+351+338: CONTACT WITH EYES: Rinse cautiously with water for several minutes. Remove contact lenses if applicable/possible. Continue rinsing
- P 331: Do NOT induce vomiting
- P 501: Dispose of contents/container at …
Description
Basically the Revell Aqua Color colours can be thinned with water, so that they can be sprayed. Thinning with Aqua Color Mix, however, has two advantages:
Firstly, the drying of the colour is delayed: this prevents a too quick drying of the colour in the spray gun and on the surface.
Secondly, this thinner optimises also the spray results on the model. When using the matt and silk-matt colour shades, Aqua Color Mix reduces the undesired edge-loss when applying the colour.
Firstly, the drying of the colour is delayed: this prevents a too quick drying of the colour in the spray gun and on the surface.
Secondly, this thinner optimises also the spray results on the model. When using the matt and silk-matt colour shades, Aqua Color Mix reduces the undesired edge-loss when applying the colour.
Hints
Recomended mixing ratio: 3-4 parts of colour with 1 part of Aqua Color Mix. Since the mixing ratio strongly depends on the spray gun used and the working pressure of the compressor, please dilute only a little at first and test the colour. If the spray gun spits or if the colour dries too quickly on the model (raw surface), then dilute a little more.