LNG, methane, propaneExternal LNG, city/natural gas sensor for warning devices GX-A1+ or GX-HSDetects natural gas (methane) from leaks in the house installation or Bottle gas (butane, propane) from leaking fittings
Technical specifications
OPERATING VOLTAGE 5 V DC -24 V.Power consumption maximum 175 mASensor output voltage 1 - 4.5 VHeating current 175 mASensor type: CatalyticHumidity (ambient): 5 - 90% RH (non-condensing)Operating temperature -10 °C /+50 °CStorage temperature: -20 °C…+70 °CService life: Approx. 5 yearsProtection class: IP20Cable length 2.5 m.Cable Ø 3.5 mm
Product type
Gas sensor
detects
Methane
Butane
Propane
Coolants / freezing agents
Width
27 mm
Height
52 mm
Depth
29 mm
Content
1 pc(s)
Dim
(W x H x D) 27 x 52 x 29 mm
Variants(All information include VAT, plus shipping costs)
User & Safety Instructions 2852871 Schabus GX-LNG Gas sensor detects Methane, Butane, Propane, Coolants / freezing agents
Description
The Gas Sensor GX-LNG is a sensor for LNG, city gas, natural gas and liquefied gas. It is used as an accessory for the gas detectors in our product range.The sensor may not be used in rooms where there is a risk of explosion.External sensor for the gas warning devices GX-A1 and GX-HSDetection for LNG, city/natural gas, (methane) and liquefied gas (propane/butane), R290The external sensor is suitable for the gas warning devices GX-A1 and GX-HS and is connected to the cable via an RJ connector.The connection cable of the sensor can be extended.The following minimum cross-sections result depending on the length of the cable:Cable cross-section 3 x 0.14 mm²: Maximum length 20 m.Cable cross-section 3 x 0.5 mm²: Maximum length 50 m.
The Gas Sensor GX-LNG is a sensor for LNG, city gas, natural gas and liquefied gas. It is used as an accessory for the gas detectors in our product range.The sensor may not be used in rooms where there is a risk of explosion.External sensor for the gas warning devices GX-A1 and GX-HSDetection for LNG, city/natural gas, (methane) and liquefied gas (propane/butane), R290The external sensor is suitable for the gas warning devices GX-A1 and GX-HS and is connected to the cable via an RJ connector.The connection cable of the sensor can be extended.The following minimum cross-sections result depending on the length of the cable:Cable cross-section 3 x 0.14 mm²: Maximum length 20 m.Cable cross-section 3 x 0.5 mm²: Maximum length 50 m.