TDK-Lambda GEN60-55-1P230 19" bench PSU (adjustable voltage) 0 - 60 0 - 55 A 3.3 kW 1 x RS232, RS485 programmable

The 3.3 kW model is only 2U flat (88 mm height) and can also be stacked directly, so requires no air slot above or below. Output voltages to 60 V and output currents up to 55 A can be set directly on the device or remotely using built-in RS232/RS485. Via analog inputs, all important functions are programmable (control voltage 0 - 5 V, 0 - 10 V or external resistance, for example, digital control of Lab View and Lab Windows drivers are appropriate). High-resolution 16-bit A/D and D/A converters enable very precise settings and programming; the dial controls on the device can be switched between coarse and fine adjustment. A dual digital display shows the current values, and various status information (suchas. Over Voltage Protection, Under Voltage Limit, overload mode, address settings again), and a monitor output provides corresponding analog voltages (0 - 5 V or 0 - 10 V) for an external monitor. The devices can naturally be operated as a constant voltage as well as a constant current source and can, if necessary, automatically switch between these operating modes. Several devices can be switched serially or in parallel. These GEN models are suitable for mounting in 19'' racks. GEN/H models are half the structural shape.