Victron Energy Blue-Solar PWM-LCD&USB Charge controller PWM 12 V, 24 V 30 A
EAN:
Part number:
Item no:
Datasheet (PDF)
Number
Total (€ 58.82 / piece)
€ 58.82
plus VAT.
Highlights & Details
Victron Energy BlueSolar PWM-LCD&USB
- Programmable
- 2x USB output
- Manual control
- MT Timer
- Switch off at low voltage
- Excellent efficiency
- Comprehensive electronic protection
Technical specifications
- Protection type IP20
- Screw terminal 16mm²
- 2x5 V USB output
- Product type
Charge controller
- Nominal voltage
12 V
24 V
- Temperature range
-35 °C up to +60 °C
- Charging current (max.)
30 A
- Own power consumption
10 mA
- Control type
PWM
- Dim
(W x H x D) 184 x 101 x 47 mm
- Weight
300 g
- Width
184 mm
- Height
101 mm
- Depth
47 mm
- Connector
Pin contact
- UKCA
yes
Documents & Downloads
Datasheet
Datasheet 2497147 Victron Energy Blue-Solar PWM-LCD&USB Charge controller PWM 12 V, 24 V 30 A
User & Safety Instructions
User & Safety Instructions 2497147 Victron Energy Blue-Solar PWM-LCD&USB Charge controller PWM 12 V, 24 V 30 A
Description
Liquid crystal screen
For status monitoring and for set-up
Load output
Overloading the battery can be prevented by connecting all loads to the load output. The load output disconnects the loads if the battery has been discharged to a specified voltage value. Some loads (especially inverters) can best be connected directly to the battery. The inverter remote control can best be connected to the load output. A special interface cable may be required, please refer to the manual. The voltage values for connecting and disconnecting can be set.
Day/night time setting of the load output
This option allows you to set a certain TIME AFTER sunset. Programmable battery charging algorithm Pre-programd algorithms for AGM, GEL, liquid electrolyte or LiFePO4 batteries (only with integrated BMS)
Two 5 V USB outputs
Maximum current (both outputs together): 2 A.
This text is machine translated.
Scope of delivery
- BLUESOLAR PWM-LCD&USB
- User manual.