• All things technology
  • Delivery within Europe
  • Right to Cancel applies
  • Specialist retailer since 1923
Start
Testing & Power SupplyTesters & MetersMultimeters

VOLTCRAFT VC-1120 Clamp meter Digital CAT III 1000 V Display (counts): 20000

A digital clamp meter displaying a sine wave graph on its screen. The device shows readings of 599Hz and 1.25V.
'Voltcraft VC-1120' digital clamp meter displaying a reading of 0368 A. Includes buttons and settings for various electrical measurements.
Clamp meter back view showing Voltcraft brand, model number VC-330, and safety warning about measuring only within specified limits.
Side view of a gray handheld device with a black antenna, likely a walkie-talkie, showing minimal buttons and sleek design.
A white and black electronic audio device featuring a USB port and two audio jacks on one side.
A technician measures electrical current with a handheld multimeter. The screen shows a wave pattern, and the device is connected to wires.
A digital multimeter measuring voltage on a circuit board with components. A device with multiple ports is seen in the background.
A digital multimeter display showing '98.68 V' in large yellow numbers, indicating voltage in V, with a dial highlighting the 100 mark.
Digital display showing '098.68 V' with measurement units indicating voltage and options for manual mode, 200 V setting, and DC measurement.
Digital display of a multimeter set to measure 200 amps DC, currently showing 1.7 amps, with options for automatic mode, Bluetooth, and non-contact voltage detection (NCV).
'A, DC' multimeter display reads '001.7 A' and 'HOLD', with a scale from 0 to 200A below. Functions include voltage, resistance, and continuity.
Digital multimeter display showing AC voltage as 1.6888 volts. Min: 0.0170, Max: 1.8888, Avg: 1.4782.
A digital multimeter display shows '1.6888 V' in yellow, indicating voltage measurement. Below, min, max, and average values are displayed.
'Digital multimeter display showing current reading of 13.68 A, inrush hold mode active, with settings for AC mode, 20 A range.'
'Inrush Hold' mode showing 13.68 amperes; range from 0 to 20 A. Measurement tools for Max/Min, Rel, Inrush, and Hz/A visible.
'Oscilloscope screen displaying a 100 Hz sine wave with 5.08V RMS. Max: 7.12V, Min: -7.22V, Vpp: 14.3V, Avg: -47.9mV.'
An oscilloscope screen displays an alternating current waveform with a frequency of 59.9Hz and RMS of 12.6A. Max is 17.6A, Min is -18.4A.
Digital multimeter display showing voltage measurement mode at 2V range, reading 0.00000 volts with options for AC, manual mode.
Digital multimeter display showing '0.00000 V', set to measure alternating current voltage at 2 V range with 'MaxMin' and 'Rel' options.
'Oscilloscope display showing an AC waveform at 59.9Hz with an RMS of 12.6A. Max current 17.6A, Min -18.4A, Vpp 36.0A, Avg -372mA.'
'Oscilloscope screen displaying a waveform with frequency 59.9Hz and RMS 53.9A. Annotations show max, min, Vpp, and avg current values.'
1/21
Datasheet (PDF)
EAN:
Part number:
Item no:
Fast track dispatch on Wed 28 Oct
1665 Piece(s)
Sales and shipping:
Conrad ElectronicTerms & Conditions
Number
Total (€ 85.99 / piece)
€ 85.99
prav.tax.untaxed incl. VAT 
plus € 19.99 
prav.priceAvailability.ecoparticipation.cost ...
prav.priceAvailability.privatecopyingfee.cost ...
without further shipping costs 
14-day return policy included
Report legal concerns

Highlights & Details

VOLTCRAFT VC-1120 Clamp meter AC/DC 600 A Oscilloscope function

  • 20,000 count true RMS auto-ranging clamp meter
  • 3-in-1 oscilloscope: AC/DC clamp meter + Recorder function + Oscilloscope function
  • Measures both current and voltage wave form simultaneously
  • Mobile phone remote control function
  • Bluetooth communication
  • Full touch-key operation
  • 7.11 cm (2.8 inch) IPS LCD

Our service for you

Technical specifications

  • - 20,000 count true RMS auto-ranging clamp meter
  • - AC/DC clamp meter + Recorder Function +Oscilloscope function 3 in 1
  • Oscilloscope
  • - Capable of measuring both current and voltage waveform simultaneously, Providing more comprehensive analysis
  • - Recorder Function: View, compare, analyze, and store measurement data via i-meter (app), efficiently managing test information
  • - Mobile phone remote control function meets special environmental testing requirements, ensuring safety and convenience
  • - Alarm Function: Customized thresholds for upper and lower limits, alerting users to ensure safety
  • - Bluetooth communication, support for Android/iOS dual systems
  • - Full touch-key operation enables quick switching with one hand
  • - 7.11 cm (2.8 inch) IPS LCD display with wide viewing range makes the values and waveform clearer
  • - Dual theme display adapts to different light environments to ensure a clearer display effect
  • - 38mm narrow-edge elongated opening design, suitable confined spaces and large wire diameters, balancing flexibility and applicability
  • - NCV function: Standard non-contact AC voltage sensing to quickly locate wires
  • - 18650 lithium battery meeting the needs of extended operations
Voltage reading range DC (min.)

20.000 mV

Product type

Clamp meter

Voltage DC reading range (max.)

1000.0 V

V AC reading range (min.)

200.00 mV

V AC reading range (max.)

1000.0 V

Amperage reading range DC (min.)

20.00 A

A DC reading range (max.)

600 A

A AC reading range (min.)

20.00 A

Amperage reading range AC (max.)

600 A

Reading range - resistance

200.00 Ω ~ 100.00 MΩ

Reading range - capacity

2,000nF ~ 20.00 mF

Frequency reading range

200.00 Hz -20,000 MHz

Basic accuracy

0.15 %

Measurement type (details)

True RMS

Frequency range

200.00 Hz -20,000 MHz

Interfaces

USB-C

Power supply (details)

Li-ion battery 3.7 V

Height

37.8 mm

Width

94.5 mm

Length

233 mm

Weight

0.34 kg

Manufacturer's standards (no certificate)

Reading category

CAT III 1000 V

Voltage metering

AC/DC

Current reading

AC/DC

Type

VC-1120

Display

Digital

Display (counts)

20000

Dim

(L x W x H) 233 x 94.5 x 37.8 mm

Features

incl. bag

Data logger

incl. testing cable

Capacitance testing

Graphics display

Continuity tester

Interfaces

USB-C

Opening range of current clamps

38 mm

Plastic free packaging

Plastic-free packaging

Compliance & Certifications

Certified by EU Garan

Documents & Downloads

Datasheet

Datasheet 3431309 VOLTCRAFT VC-1120 Clamp meter Digital CAT III 1000 V Display (counts): 20000

User & Safety Instructions

User & Safety Instructions 3431309 VOLTCRAFT VC-1120 Clamp meter Digital CAT III 1000 V Display (counts): 20000

User & Safety Instructions 3431309 VOLTCRAFT VC-1120 Clamp meter Digital CAT III 1000 V Display (counts): 20000

Warranty Terms

Warranty Terms 3431309 VOLTCRAFT VC-1120 Clamp meter Digital CAT III 1000 V Display (counts): 20000

Description


Precision meets versatility: The 3-in-1 clamp meter
The VOLTCRAFT VC-1120 AC/DC 600 A clamp-on ammeter with integrated oscilloscope function is the ideal partner for installation, operation and service. With a 20,000 count display, True RMS and automatic range detection, this clamp provides precise measurement results on three levels: It combines an AC/DC clamp meter, a comprehensive recording function and a powerful oscilloscope in a compact device. This allows simultaneous measurement of current and voltage values, WAS complex diagnostics significantly simplifies and accelerates.
Smart operation and connectivity
The operation of the clamp meter is intuitive and efficient thanks to the 7.11 cm (2.8 inch) IPS LCD with multiple touch operation. Both iOS and Android-based mobile devices can be connected to the clamp-on ammeter via Bluetooth, enabling WAS recording, display, comparison, analysis and storage of measurement data in the i-meter APP. Two different display topics can be called up to compare measurement series.
Oscilloscope functions
The integrated oscilloscope function offers analogue bandwidth and real-time sampling. 1 channels are available and important measured values such as RMS, frequency, maximum, minimum, peak and average values can be recorded. An automatic trigger function facilitates signal recording.
Current measuring functions
The VOLTCRAFT VC-1120 enables measurements of AC/DC voltage and current, switch-on current, resistance, capacity, frequency and switch-on duration. Also includes diode and continuity testing with buzzer as well as NCV functions for contact-free voltage detection.
Delivery package with accessories
Along with the clamp meter, the delivery package includes a pair of test leads, a USB-cable, a case for a safe storage as well as a detailed instructions for use.

This text is machine translated.

Features

  • Oscilloscope function: Analog bandwidth, Real-time sampling, 1 channel, Measurement value (Rms, Freq, Max., Min., PK-PK, Avg), Auto trigger mode
  • Clamp meter function: AC/DC voltage, AC/DC current, Inrush current, Resistance, Capacitance, Frequency, Duty cycle, Diode, On-Off, Buzzer, NCV
  • Recorder function: view, compare, analyze, and store measurement data via i-meter app
  • Dual theme display
  • 38 mm narrow-edge
  • NCV function

Scope of delivery

  • Clamp meter
  • Test leads (pair)
  • USB cable
  • Soft bag
  • User manual

Frequently Bought Together

(*All information is plus legal VAT)
Total price:

€ 218.96*

Accessories

(*All information is plus legal VAT)

The necessary accessories are required to use the article as described.

More interesting products

(*All information is plus legal VAT)