User & Safety Instructions 2289471 AEG LD6 10617 Charger 6 V, 12 V 6 A
Description
AEG Automotive 10617 microprocessor charger LD6.0
The progress in technology and vehicle technology has been made possible by AEG to offer you a state-of-the-art battery charger. In addition to the well-known features, AEG chargers are the first to use the HF MCU (high frequency micro control unit) chip at AEG. With this chip it is possible to charge a car battery with 7 charging stages 20% faster and more gently than comparable competitive products with 9.10.11 and further charging stages.
Another feature of the battery chargers is the auto-start function, in which the charger starts automatically when the mains voltage is re-entered and the charging process continues, supported by the program, in the event of a power failure. This ensures continuous battery maintenance over months. After selecting the connected battery type (6V /12V or 24V LD8.0), the charger detects the battery capacity and the battery status and calculates the required charging parameters (charging voltage, charging current). This enables efficient and safe charging. If an incorrect battery voltage is set or the battery is defective, the charging process is not carried out and the "Error" LED (9) lights up.
The AEG microprocessor charger is designed to charge open and a variety of closed batteries, such as those built into cars, ships, trucks and other vehicles.
For example
: Wet batteries (WET) lead-acid batteries (liquid electrolyte) maintenance-free lead-acid batteries (MF) gel batteries (electrolyte) EFB (Enhanced Flooded Battery) AGM batteries (electrolyte in glass fiber fleece) Features: AEG microprocessor charger LD 6 Features at a glance:
Fully automatic, diagnostic, rescue, charging and maintenance function especially battery-protecting soft-charging function Rescue function, especially for deep-discharged batteries Autostart function after power failure All-weather functionality for all common 6 and 12 V car batteries extends the battery life without removing the battery necessary for cars, motorcycles, boats and tractors Safe and simple application No damage to the sensitive on-board electronics Charging characteristic: Microprocessor-controlled battery type: AGM, EFB, gel, lead-acid, maintenance-free and low-maintenance batteries Operating voltage: 230 V alternating current Display: LCD display (mode, charging progress and errors) Safety features: Protection against overcharging, short-circuit, overheating, polarity reversal and protection against sparks and electronics Practical suspension hooks Protective insulated terminals Convenience connection for easy connection to the car battery
This text is machine translated.
Scope of delivery
Comfort cable with terminal clamps
Comfort cable with ring eyelets
Description
AEG Automotive 10617 microprocessor charger LD6.0
The progress in technology and vehicle technology has been made possible by AEG to offer you a state-of-the-art battery charger. In addition to the well-known features, AEG chargers are the first to use the HF MCU (high frequency micro control unit) chip at AEG. With this chip it is possible to charge a car battery with 7 charging stages 20% faster and more gently than comparable competitive products with 9.10.11 and further charging stages.
Another feature of the battery chargers is the auto-start function, in which the charger starts automatically when the mains voltage is re-entered and the charging process continues, supported by the program, in the event of a power failure. This ensures continuous battery maintenance over months. After selecting the connected battery type (6V /12V or 24V LD8.0), the charger detects the battery capacity and the battery status and calculates the required charging parameters (charging voltage, charging current). This enables efficient and safe charging. If an incorrect battery voltage is set or the battery is defective, the charging process is not carried out and the "Error" LED (9) lights up.
The AEG microprocessor charger is designed to charge open and a variety of closed batteries, such as those built into cars, ships, trucks and other vehicles.
For example
: Wet batteries (WET) lead-acid batteries (liquid electrolyte) maintenance-free lead-acid batteries (MF) gel batteries (electrolyte) EFB (Enhanced Flooded Battery) AGM batteries (electrolyte in glass fiber fleece) Features: AEG microprocessor charger LD 6 Features at a glance:
Fully automatic, diagnostic, rescue, charging and maintenance function especially battery-protecting soft-charging function Rescue function, especially for deep-discharged batteries Autostart function after power failure All-weather functionality for all common 6 and 12 V car batteries extends the battery life without removing the battery necessary for cars, motorcycles, boats and tractors Safe and simple application No damage to the sensitive on-board electronics Charging characteristic: Microprocessor-controlled battery type: AGM, EFB, gel, lead-acid, maintenance-free and low-maintenance batteries Operating voltage: 230 V alternating current Display: LCD display (mode, charging progress and errors) Safety features: Protection against overcharging, short-circuit, overheating, polarity reversal and protection against sparks and electronics Practical suspension hooks Protective insulated terminals Convenience connection for easy connection to the car battery