Name: GIRA Dimmer/actuator 217200 1 pc(s)
Brand: GIRA
SKU: 3821246

Technical specifications

KNX bus system: Yes
KNX-RF bus system (radio): No.
Bus system wireless bus: No.
Bus system LON: No.
Bus system Powernet: No.
Other bus systems: Without
Width in division units: 4
On-site/manual operation: Yes
With LED indicator: No.
With bus connection: Yes
Design: Dimming actuator
Extension input: Yes
Number of outputs: 2
Output power 20..300 W
Power addition usable: No.
Load start: Universal
Max. Switching capacity LED 30 W
Parallel operation possible: No.
Mains frequency: 50/60 Hz.

Type: Universal dimming actuator 2f. 2 X 300W KNX/EIB REG 217200

Product type: Dimmer/actuator

Nominal voltage: 230 V

: IP20

Content: 1 pc(s)

Mounting type: REG

UKCA: yes

Documents & Downloads

User & Safety Instructions

User & Safety Instructions 3821246 GIRA Dimmer/actuator 217200 1 pc(s)

Description

Dimmer actuator 2-fold for KNX 2 x 300 W/VA Features: - Dim actuator with integrated bus connection. - Switching and dimming incandescent lamps, HV halogen lamps, dimmable HV LED lamps, dimmable compact fluorescent lamps, dimmable inductive transformers with low-voltage halogen or low-voltage LED lamps, dimmable electronic transformers with low-voltage halogen or low-voltage LED lamps. - Automatic or manual selection of the dimming principle appropriate to the load. - Safe from idling, short-circuit and over temperature. - Manual operation of the outputs independent of the bus (also possible on-site operation). - Construction site operation: Outputs can be operated manually without bus voltage only with the operating voltage. Functions - Independent control of the dimming channels. - Central switching function for controlling all dimming channels. - Delay for active sending feedback after bus voltage recovery. - Specification of the load start and definition of the dimming principle possible: Universal (with automatic calibration procedure), electronic transformer / NV LED (capacitive / phase section), conventional transformer / NV LED (inductive / phase section), HV LED (phase section) or HV LED (phase section). - Feedback signal "Switching" and "Brightness value". - Adjustment of the dimmable brightness range is possible. - Dimming behavior and dimming characteristics can be parameterized. - Activation behavior can be parameterized for relative dimming commands. - Switch lamp-protecting on and off. - Automatic adjustment and scaling of the dimmable brightness range when using universal power accessories. - The behavior of a dimming channel in the "OFF" state when a relative dimming command is received can be parameterized (switch-on and raise-dim or no reaction). - Message frames for short circuit, overload and load failure. - Feedback of the connected load start. - Lock function or forced position function can be parameterized for each output. - Time functions (on or off delay, staircase lighting function). - Staircase light function with pre-warning function by time-controlled reduction of the lighting or activation of a permanent lighting. - Link function and up to eight scenes per dimming channel. - Operating hour meter for recording the switch-on time. - Reactions can be set in the event of bus voltage failure and return. Notes: - Power extension with GIRA power accessories. - Mounting on DIN rail. - VDE approval according to EN 60669-1, EN 60669-2-1. Scope of supply: - Connection and branch terminal for KNX included.

This text is machine translated.

Description

Dimmer actuator 2-fold for KNX 2 x 300 W/VA Features: - Dim actuator with integrated bus connection. - Switching and dimming incandescent lamps, HV halogen lamps, dimmable HV LED lamps, dimmable compact fluorescent lamps, dimmable inductive transformers with low-voltage halogen or low-voltage LED lamps, dimmable electronic transformers with low-voltage halogen or low-voltage LED lamps. - Automatic or manual selection of the dimming principle appropriate to the load. - Safe from idling, short-circuit and over temperature. - Manual operation of the outputs independent of the bus (also possible on-site operation). - Construction site operation: Outputs can be operated manually without bus voltage only with the operating voltage. Functions - Independent control of the dimming channels. - Central switching function for controlling all dimming channels. - Delay for active sending feedback after bus voltage recovery. - Specification of the load start and definition of the dimming principle possible: Universal (with automatic calibration procedure), electronic transformer / NV LED (capacitive / phase section), conventional transformer / NV LED (inductive / phase section), HV LED (phase section) or HV LED (phase section). - Feedback signal "Switching" and "Brightness value". - Adjustment of the dimmable brightness range is possible. - Dimming behavior and dimming characteristics can be parameterized. - Activation behavior can be parameterized for relative dimming commands. - Switch lamp-protecting on and off. - Automatic adjustment and scaling of the dimmable brightness range when using universal power accessories. - The behavior of a dimming channel in the "OFF" state when a relative dimming command is received can be parameterized (switch-on and raise-dim or no reaction). - Message frames for short circuit, overload and load failure. - Feedback of the connected load start. - Lock function or forced position function can be parameterized for each output. - Time functions (on or off delay, staircase lighting function). - Staircase light function with pre-warning function by time-controlled reduction of the lighting or activation of a permanent lighting. - Link function and up to eight scenes per dimming channel. - Operating hour meter for recording the switch-on time. - Reactions can be set in the event of bus voltage failure and return. Notes: - Power extension with GIRA power accessories. - Mounting on DIN rail. - VDE approval according to EN 60669-1, EN 60669-2-1. Scope of supply: - Connection and branch terminal for KNX included.

This text is machine translated.