PCE Instruments PCE-123-ICA Handheld multimeter Calibrated to (ISO standards) Digital ISO calibration, incl. bag
Datasheet (PDF)
EAN:
Part number:
Item no:
Highlights & Details
PCE instruments calibrator PCE-123-ICA
- K, J, E, T TEMPERATURE SENSOR (°C UND °F)
- Frequency range 1 … 62500 Hz
- Basic accuracy 0.025 %
- Simple operation via keyboard
- Automatic ramp functions
- Beep warning “Open” (mA) or “Short circuit” (mV, V)
- Incl. ISO calibration certificate
Technical specifications
- MA DC current (1 kΩ max. Load, 24 V supply)
- Range 4 … 20 mA/ 0 … 20 mA/ 0 … 24 mA
- Resolution 1 µA
- Accuracy ±0.025 % ±3 µA
- Warning beep indicates when the current loop is open, and the current output is above 1 mA
- MV, V DC voltage (1 mA supply)
- Ranges
- 0 … 100.00 mV
- (0 - 10.000 V)
- 0 … 1.0000 V.
- Resolution
- 10 µV
- 1 mV
- 100 µV
- Accuracy
- ±0.05 % ±30 µV
- ±0.05 % ±3 mV
- ±0.05 % ±300 µV
- Warning beep tone, in case of short circuit and voltage output above 10 mV
- K, J, E, T - TYPE
- Temperature sensor (1 kΩ min.)
- Ranges
- K: -200 ... 0 °C and 0 ... +1370 °C
- J: -100 ... 0 °C and 0 … +760 °C.
- E: -100 … 0 °C AND 0 … +700 °C.
- T: -200 … 0 °C AND T: 0 … +400 °C.
- Resolution 1 °C (all)
- Accuracy
- K: ±1.1 °C AND ±0.8 °C.
- J: ±0.9 °C AND ±0.7 °C.
- E: ±0.9 °C AND ±0.7 °C.
- T: ±1.0 °C AND ±0.8 °C.
- Frequency range
- 1 ... 125 Hz and 126 ... 62.5 kHz
- Resolution 1 ... 125 Hz / 1 Hz 126 ... 62.5 kHz / 604 steps
- Accuracy ±0.04 Hz
- Selectable 604 frequencies
- Output signal approx. 6.4 V
- Signal type Rectangle
- General properties
- Display 5-digit LCD
- Operating temperature range 0 ... +50 °C
- Operating humidity range max. 85 % r.h.
- Storage temperature -20 ... +60 °C
- Storage humidity max. 85 % r.F.
- Power supply 1 x 9 V or 6 x 1.5 V in the battery pack
- Power consumption 60 mA … 180 mA (depending on output)
- Battery indicator 5.5 V at 150 mA
- Dimensions 88 x 168 x 26 mm
- Weight 330 g.
- Voltage reading range DC (min.)
10 µV
- Product type
Handheld multimeter
- Voltage DC reading range (max.)
10 V
- Amperage reading range DC (min.)
0 mA
- A DC reading range (max.)
24 mA
- Temperature
-200 - 1370 °C
- Basic accuracy
0.05 %
- Measurement type (details)
Non-invasive
- Frequency range
1 - 125 Hz
- Power supply (details)
9 V
- Height
26 mm
- Width
88 mm
- Length
168 mm
- Weight
330 g
ISO standards
- Voltage metering
DC
- Current reading
DC
- Type
PCE-123-ICA
- Display
Digital
- Dim
(L x W x H) 168 x 88 x 26 mm
- Calibration service
Setpoint selector / transmitter PCE-123-ICA incl. ISO calibration certificate for simulating and measuring electrical unit signals, frequency and temperature
- Temperature reading range (max.)
+1370 °C
- Temperature reading range (min.)
-200 °C
- Reading frequency
1 - 125 Hz
- Features
ISO calibration
incl. bag
IP20
- Plastic free packaging
Plastic-free packaging
Documents & Downloads
Datasheet
Datasheet 3812400 PCE Instruments PCE-123-ICA Handheld multimeter Calibrated to (ISO standards) Digital ISO calibration, incl. bag
User & Safety Instructions
User & Safety Instructions 3812400 PCE Instruments PCE-123-ICA Handheld multimeter Calibrated to (ISO standards) Digital ISO calibration, incl. bag
Description
The calibrator is a network-independent device for simulation of control signals / unit signals in the MSR-technology, with which you can test / calibrate almost all parameters of control units and measuring devices. Here, our calibrator serves to provide an electrical output signal (mA, mV, V as well as the frequency in Hz and the temperature in °C or °F).
In addition, the calibrator has automatic step and ramp functions, percentage pre-selection of the output signal jumps (0 to 100 %) by up / down buttons, and a direct input of the output value (e.g. 13.8 mA). The operation is very simple (intuitive), directly via the keypad. Its very high accuracy and the very universal application area of calibrator is to be highlighted. Therefore, it should not be missing in any electrical workshop or MSR department in the trade, in industry or in the automation technology.
This text is machine translated.
In addition, the calibrator has automatic step and ramp functions, percentage pre-selection of the output signal jumps (0 to 100 %) by up / down buttons, and a direct input of the output value (e.g. 13.8 mA). The operation is very simple (intuitive), directly via the keypad. Its very high accuracy and the very universal application area of calibrator is to be highlighted. Therefore, it should not be missing in any electrical workshop or MSR department in the trade, in industry or in the automation technology.
This text is machine translated.
Scope of delivery
- 1 x calibrator PCE-123-ICA
- 1 x carry case
- 1 x type K adapter
- 1 x battery pack holder
- 6 x battery
- 1 x test leads with alligator clips
- 1x user manual
- 1 x ISO calibration certificate
What kind of Multimeters are you looking for?
Accessories
(*All information is plus legal VAT)The necessary accessories are required to use the article as described.
€ 25.99*
