Proxxon Micromot PD 400 Precision lathe 550 W
EAN:
Part number:
Item no:
Number
Total (€ 2,979.00 / piece)
€ 2,979.00
incl. VAT
Only 4 Piece(s) available
Highlights & Details
Precision lathe PD 400
- 6 spindle speeds
- Quiet 550W motor
- Overall size approx. 900 x 400 x 300mm (L x W x H)
- Weight approx. 45kg
- Uses cutting tools 10 x 10mm
Technical specifications
- Product type
Precision lathe
550 W
- Mandrel speed (min.)
80 U/min
- Mandrel speed (max.)
2800 U/min
- Tip width
400 mm
- Tip height
85 mm
- Operating voltage
230 V
- Weight
45 kg
- Length
900 mm
- Width
400 mm
- Height
300 mm
- UKCA
yes
Documents & Downloads
User & Safety Instructions
User & Safety Instructions 826184 Proxxon Micromot PD 400 Precision lathe 550 W
Information
Information 826184 Proxxon Micromot PD 400 Precision lathe 550 W
Description
The Lathe PD 400 is the heart of a multifunctional and expandable system and is unequalled in its class!
Ideal for straight and cross cuts, taper turning, internal and external thread cutting, slotting, etc. Useable on materials such as steel, nonferrous metals, aluminium and alloys. Negligible tolerances even under heavy loads. The wide range of accessories complements the lathe's functions. The bed is already equipped with a milled and tapped surface for securing mill/drill PF 400.
Technical data:
Distance between centres 400mm and cross slide travel 85mm, over the top slide is 116mm. Solid, ribbed bed is made from quality cast iron with ground and hardened ways. Oversized spindle with 2 adjustable taper bearings, MK3 taper and 20.5mm bore. Run-out, without chuck, 5/1,000mm. Includes the precision 3 jaw chuck, 100mm diameter.
Six spindle speeds are provided via belt drive: stage 1: 80 - 330 - 1 ,400rpm and stage 2: 160 - 660 - 2,800rpm. Powerful, quiet motor with 550W power output. Practical handwheels with zero adjustable graduated collar (2 parts). For cross slide and upper carriage: 1 division = 0.025mm. 1 rev. = 1.0mm. For tailstock and leading spindle: 1 division = 0.05mm. 1 rev. = 1.5mm. The activatable auto feed has speeds of 0.07 or 0.14mm/rev.
An integrated gearbox, for LH and RH threads, with change gears provides 19 metric pitches: 0.2 - 0.25 - 0.3 - 0.35 - 0.4 - 0.45 - 0.5 - 0.6 - 0.7 - 0.75 - 0.8 - 0.9 -1.0 - 1.25 - 1.5 - 1.75 - 2.0 - 2.5 -3.0mm. Imperial threads of 10 - 48 TPI are also possible.
A rotating centre MK 2 and tailstock Complete with change gears to cut threads (in 19 steps from 0.2 to 3.0mm). Clearly positioned and easy to change. Main switch with auto-start protection and emergency off. RÖHM precision feed (Ø 100mm). Powerful capacitor motor with 550W output power. 53 chuck of 10mm capacity, B12 taper, are included. Lead screw with acme thread 12 x 1.5, top slide 52mm and adjustable to turn tapers, with graduations up to 45°. Tailstock with MK 2. 24mm diameter and 40mm travel (with graduations).
Overall size approx. 900 x 400 x 300mm (L x W x H). Weight approx. 45kg. Uses cutting tools 10 x 10mm.
A tool holder with two adjustable inserts is included as standard.
Ideal for straight and cross cuts, taper turning, internal and external thread cutting, slotting, etc. Useable on materials such as steel, nonferrous metals, aluminium and alloys. Negligible tolerances even under heavy loads. The wide range of accessories complements the lathe's functions. The bed is already equipped with a milled and tapped surface for securing mill/drill PF 400.
Technical data:
Distance between centres 400mm and cross slide travel 85mm, over the top slide is 116mm. Solid, ribbed bed is made from quality cast iron with ground and hardened ways. Oversized spindle with 2 adjustable taper bearings, MK3 taper and 20.5mm bore. Run-out, without chuck, 5/1,000mm. Includes the precision 3 jaw chuck, 100mm diameter.
Six spindle speeds are provided via belt drive: stage 1: 80 - 330 - 1 ,400rpm and stage 2: 160 - 660 - 2,800rpm. Powerful, quiet motor with 550W power output. Practical handwheels with zero adjustable graduated collar (2 parts). For cross slide and upper carriage: 1 division = 0.025mm. 1 rev. = 1.0mm. For tailstock and leading spindle: 1 division = 0.05mm. 1 rev. = 1.5mm. The activatable auto feed has speeds of 0.07 or 0.14mm/rev.
An integrated gearbox, for LH and RH threads, with change gears provides 19 metric pitches: 0.2 - 0.25 - 0.3 - 0.35 - 0.4 - 0.45 - 0.5 - 0.6 - 0.7 - 0.75 - 0.8 - 0.9 -1.0 - 1.25 - 1.5 - 1.75 - 2.0 - 2.5 -3.0mm. Imperial threads of 10 - 48 TPI are also possible.
A rotating centre MK 2 and tailstock Complete with change gears to cut threads (in 19 steps from 0.2 to 3.0mm). Clearly positioned and easy to change. Main switch with auto-start protection and emergency off. RÖHM precision feed (Ø 100mm). Powerful capacitor motor with 550W output power. 53 chuck of 10mm capacity, B12 taper, are included. Lead screw with acme thread 12 x 1.5, top slide 52mm and adjustable to turn tapers, with graduations up to 45°. Tailstock with MK 2. 24mm diameter and 40mm travel (with graduations).
Overall size approx. 900 x 400 x 300mm (L x W x H). Weight approx. 45kg. Uses cutting tools 10 x 10mm.
A tool holder with two adjustable inserts is included as standard.
Features
- Change gear for cutting threads
- Main switch with restart protection and emergency stop function
- ROEHM-precision lathe chuck (dia. 100 mm)
- Condenser motor with 550 W power
- Multiple steel arbor and 2 steel arbor elements (height-adjustable and with stop)
- Concurrent live centre with MK-2 intake in the tailstock
- Hand wheels made of aluminum with adjustable justierbarem graduated ring made of steel
- Disguised guide screw with trapezoid thread (12 x 1.5 )
- Cross-ribbed machine bed made of cast iron. With polished, straddle-legged prism guide for support and tailstock
- Hand wheel for quick adjustment of the support
- One switch for clockwise, anti-clockwise rotation and off
- Switch for decoupling the guide screw
- Over-dimensioned main spindle (chuck-side) with 2 adjustable tapered roller bearings and MK 3-intake at the chuck side.
Frequently Bought Together
(*All information is plus legal VAT)Total price:
€ 3,390.78*
What kind of Lathes are you looking for?
Accessories
(*All information is plus legal VAT)The necessary accessories are required to use the article as described.
