Image similar
Image similar
QuickCool QC-PC-CO-CH1 Thermoelectric regulator 12 V, 24 V 20 A (L x W x H) 65 x 50 x 20 mm
EAN:
Part number:
Item no:
Nominal voltage
12 V
24 V
Max. current
20 A
Product type
Thermoelectric regulator
Type
QC-PC-C01C
Length
65 mm
Highlights & Details
Peltier-Controller 12 V
- Temperature range -40°C to +100°C.
- Sensitivity: 0.1°C
- Accuracy ± 1 K
Technical specifications
- Supply voltage: 12....24VDC/<45mA
- Separate driver voltage 3…48VDC
- Maximum Peltier current 20A
- Interface to the display: 3.5mm stereo jack
- Temperature range -40°C to +100°C.
- Sensitivity: 0.1°C
- Accuracy ± 1 K
- P-control characteristics
- Control parameters for heating range and cooling range can be set separately
- Maximum set point limitation can be set
- Minimum setpoint limiting can be set
- Maximum output power can be set
- Minimum output power can be set
- Detection of sensor break (display: NP) and short circuit (display: PSC)
- RoHS compliant
- Type
QC-PC-C01C
- Nominal voltage
12 V
24 V
- Max. current
20 A
- Length
65 mm
- Width
50 mm
- Height
20 mm
- Dim
(L x W x H) 65 x 50 x 20 mm
- RoHS-compliant
Yes
- Nominal voltage (details)
12 V
- Product type
Thermoelectric regulator
Documents & Downloads
User & Safety Instructions
User & Safety Instructions 3061914 QuickCool QC-PC-CO-CH1 Thermoelectric regulator 12 V, 24 V 20 A (L x W x H) 65 x 50 x 20 mm
Description
The Peltier controller QC-PC-CO-CH1 was developed for controlling Peltier elements. The controller controls the temperature in a temperature set-up.
The temperature range of the controller comprises -40°C to +100°C, whereby the controller automatically controls the Peltier element in such a way that is heated or cooled as required.
The control parameters are programmable. The QC-PC-DCH1 display can be connected via an interface. The display is used to display current control data and to program the control parameters.
The temperature specification is done either via an externally connected potentiometer (included in the delivery) or a programmable fixed value.
The device must be integrated into a circuit. This is not a plug and play device.
This text is machine translated.
The temperature range of the controller comprises -40°C to +100°C, whereby the controller automatically controls the Peltier element in such a way that is heated or cooled as required.
The control parameters are programmable. The QC-PC-DCH1 display can be connected via an interface. The display is used to display current control data and to program the control parameters.
The temperature specification is done either via an externally connected potentiometer (included in the delivery) or a programmable fixed value.
The device must be integrated into a circuit. This is not a plug and play device.
This text is machine translated.
Scope of delivery
- PELTIER CONTROLLER QC-PC-CO-CH1
- Temperature sensor NTC 10KΩ (β=3977K)
- Potentiometer 10KΩ
- User manual