Renkforce RF-3395610 Network extender Two-wire Range (max.): 300 m 1 pc(s) 200 Mbps PoE

Basically, the range of an Ethernet network is 100 m, which also limits the maximum length of a network cable. Now, you may have to install a camera at a greater distance, for example.
With this network extension, the range is extended to up to 300 meters and speeds of up to 100 MBit/s. Perfectly suitable for low-cost IP camera installations. Via a splitter you can connect up to four slave adapters and operate your cameras. Of course, this technology is open to all protocols, codes and applications to ensure compatibility for IP cameras and the associated management software.

In addition, the Extender is Plug & Play-enabled. No IP address or network configuration is required for installation.

Network signal and power forwarding in one
Through the PoE (power over Ethernet) function, both a network and current signal can be transmitted via the 2-wire cable. This is especially helpful when there is no power connection in the vicinity of the receiver and the connected device, since you can supply them despite this.

High compatibility
As long as you want to connect other devices to the network extension, you do not need to buy a complete system again. By means of a terminal strip splitter you can simply connect further receivers to the already existing network and current signal, which was saves you a lot of effort apart from the costs. The transmitter or receiver is compatible with all cat 5 , cat 5e, CAT6, CAT6e and cat 7 network cables as well as 2-wire cables.

This text is machine translated.