Renkforce RF-3570312 19 inch 2 x Server rack cabinet HDD bracket 1 U

This sturdy, industrial-enabled RAID hard disks use is intended for the installation of two 8.89 cm (3.5") hard disks in a network or server cabinets (1U) via rack mounting. Through the very rugged design makes the USB panel, in particular for the building systems technology and industrial environments.

Improved Performance, thanks to RAID
Connect your drives together into a network or secure your data, thanks to the various RAID options. Thereby you have the choice between maximum read and write performance in RAID0 or the highest data security in the RAID 1-Mode. It will also in the JBOD mode allows two SATA hard disks as a large drive.
RAID0 = When writing, the data is distributed on both hard disks/SSDs; the two hard disks/SSDs are combined to one
RAID1 = the data is stored on both hard disks/SSDs at the same time, these are so against mechanical/electronic defects in one of the two hard disks/SSDs protected.

Stay cool
High-performance hard disks heating often the air so that these from within the network cabinet easily overheat. Thanks to the built-in fan can be guaranteed an improved air circulation, so that your components always keep a cool head.

Sturdy metal casing
The USB panel consists of resistant metal that has a long life and jedlichen applications is guaranteed. Thanks to the standardised 48.26 cm (19") dimensions, the panel for all conventional network or server cabinets.

Easy to set up
With the help of the already prefabricated holes and the enclosed mounting material allows you to switch the USB/RS422 + RS485 Hub-Hub in few handles fit in your cabinet - even without a lot of handicraft skills. Thanks to the reliable ASM chipset is the installation of the hub for a variety of operating systems, including Windows, Linux and Mac.

This text is machine translated.