1/2
Thermaltake Pacific G1/4 PETG Tube 45-Degree Dual Compression 16mm OD – Black Water cooling - elbow piece
EAN:
Part number:
Item no:
Total (€ 19.99 / piece)
€ 19.99
incl. VAT
14-day return policy included
Highlights & Details
Thermaltake Pacific G1/4 PETG Tube 45-Degree Dual Compression 16mm OD – Black Water cooling - elbow piece
- 45° compression unit
- For G1/4 Gewind
- LCS certified
- A variety of expansion options
Technical specifications
- Product type
Water cooling - elbow piece
- Weight
22 g
- Factory colour
Black
- Heatsink material
Copper
- UKCA
not relevant
Documents & Downloads
User & Safety Instructions
User & Safety Instructions 1626017 Thermaltake Pacific G1/4 PETG Tube 45-Degree Dual Compression 16mm OD – Black Water cooling - elbow piece
Description
Made of black-coated copper produced 45-degree compaction unit. Fits on G1/4 thread and has an outer diameter of 16 mm.
LCS certified
"Tt LCS Certified" is a seal, with the Thermaltake products, the special requirements and standards for the support of Flussigkeitskuhlungen. The Tt LCS certificate is aimed at all power users, at a glance, what components for compatibility with water cooling systems tested and designed to ensure the best possible cooling performance.
High-flow and leak-free design
The fittings allow for a proper connection with G1/4-Ports and ensure a proper seal of the cooling components, while at the same time a uniform sealing the hoses is ensured. The fittings have six pre-O-rings. Use PETG - tube for all its water cooling needs.
A variety of expansion options
Thermaltake offers a complete product series Pacific, which is the highest demands in terms of aesthetics and functionality. Each cooling system of the pacific series, both internal and external components can be extended.
This text is machine translated.
LCS certified
"Tt LCS Certified" is a seal, with the Thermaltake products, the special requirements and standards for the support of Flussigkeitskuhlungen. The Tt LCS certificate is aimed at all power users, at a glance, what components for compatibility with water cooling systems tested and designed to ensure the best possible cooling performance.
High-flow and leak-free design
The fittings allow for a proper connection with G1/4-Ports and ensure a proper seal of the cooling components, while at the same time a uniform sealing the hoses is ensured. The fittings have six pre-O-rings. Use PETG - tube for all its water cooling needs.
A variety of expansion options
Thermaltake offers a complete product series Pacific, which is the highest demands in terms of aesthetics and functionality. Each cooling system of the pacific series, both internal and external components can be extended.
This text is machine translated.
Hints
Caution
Thermaltake recommends the following steps have to be carried out after completion of the water circuit configuration:
- It is strongly recommended to use a proven in front of the orderly and coolant.
- Fill the tank with coolant and switch the device on and off several times, while the pump the coolant in the loop.
- Allow the pump does not run dry, if no liquid enters into the pump, immediately turn off
- Fill the container up to the top, in order to prevent the air in the pump
- If necessary, tilt the system easily from one side to the other, in order to remove the air out of the loop.
- Place some paper towels under fittings and connection points to check the system for leaks.
- Insert the loop with an open filler nozzle 24 hours in order to remove the air out of the loop
- Rinse thoroughly before starting the system to prevent coolant or unwanted particles on your hoses, radiators and other cooling components.
Coolant could over time fade.