VOLTCRAFT ET-200 Insulation tester 50 V, 100 V, 250 V, 500 V, 1000 V 20 GΩ
EAN:
Part number:
Item no:
Datasheet (PDF)
Number
Total (€ 204.99 / piece)
€ 204.99
incl. VAT
14-day return policy included
Highlights & Details
Insulation tester ET-200
- Test voltage 50/100/250/500/1000 V
- Insulation resistance measurement up to 20 GΩ
- Resistance measurement of 0.01 Ω - 20 kΩ
Technical specifications
- Product type
Insulation tester
- Test voltage
50 V
100 V
250 V
500 V
1000 V
- Reading type
Insulation resistance
AC voltage
DC voltage
- Continuity testing
acoustic (test current 200 mA)
Manufacturer's standards (no certificate)
- Reading range - resistance
0.01 Ω - 20.0 GΩ
- Interfaces
none
IP40
- Power supply (details)
6 Mignon batteries (AA)
- Dim
(L x W x H) 5.9 x 10.3 x 22.5 cm
- Weight
640 g
- Display type
Digital (LCD)
- Insulation resistance (max.)
20 GΩ
- Voltage reading range (max.)
600 V
- Voltage reading range (min.)
0.1 V
- Reading category
CAT IV 600 V
- Width
10.3 cm
- Height
22.5 cm
- Length
5.9 cm
Compliance & Certifications
Certified by EU Garan
Documents & Downloads
Datasheet
Datasheet 1301293 VOLTCRAFT ET-200 Insulation tester 50 V, 100 V, 250 V, 500 V, 1000 V 20 GΩ
User & Safety Instructions
User & Safety Instructions 1301293 VOLTCRAFT ET-200 Insulation tester 50 V, 100 V, 250 V, 500 V, 1000 V 20 GΩ
Conformity certificate
Conformity certificate 1301293 VOLTCRAFT ET-200 Insulation tester 50 V, 100 V, 250 V, 500 V, 1000 V 20 GΩ
Warranty Terms
Warranty Terms 1301293 VOLTCRAFT ET-200 Insulation tester 50 V, 100 V, 250 V, 500 V, 1000 V 20 GΩ
Description
This text is machine translated.
Measure insulation resistance up to max. 20 GΩ with test voltages 50/100/250/500/1000 V. In addition, the ET-200 measurement functions for DC and AC voltages up to 600 V CAT IV and for resistances up to 20kΩ. An optional remote trip test lead enables the measurement resolution directly at the probe tip; for this purpose, the ET-200 during the measurement not be held in the hand. By the soft rubber protection device is ideally protected against shocks.
Calculation of the polarization index (PI) and the dielectric absorption rate (DAR)
The polarization index and the dielectric absorption rate give information about the quality of the insulation.
Test time setting
The test time during long-term measurement can be preset depending on the need.
Comparison function with Pass/Fail Display
The limit values for a quick pass/fail display can be adjusted individually. As a result of this, user-specific tolerances easily verifiable.
Measure insulation resistance up to max. 20 GΩ with test voltages 50/100/250/500/1000 V. In addition, the ET-200 measurement functions for DC and AC voltages up to 600 V CAT IV and for resistances up to 20kΩ. An optional remote trip test lead enables the measurement resolution directly at the probe tip; for this purpose, the ET-200 during the measurement not be held in the hand. By the soft rubber protection device is ideally protected against shocks.
Calculation of the polarization index (PI) and the dielectric absorption rate (DAR)
The polarization index and the dielectric absorption rate give information about the quality of the insulation.
Test time setting
The test time during long-term measurement can be preset depending on the need.
Comparison function with Pass/Fail Display
The limit values for a quick pass/fail display can be adjusted individually. As a result of this, user-specific tolerances easily verifiable.
Features
- True RMS AC voltage measurement
- Data-hold function
- Lock function for continuous testing
- Measuring time pre-selection
- Display of the polarisation index (PI) and the dielectric absorption rate (DAR)
- Optional probe with release key
- Red warning light in the measuring mode.
- Automatic Zero Balance
- Min/max function
- continuity tester
- Integrated measurement data memory
- Comparison function with Pass/Fail Display
- Test voltages adjustable (50% - 120% in 10% steps).
Scope of delivery
- 2 test leads
- 2x alligator clip
- 2 test probes
- 6 batteries.
- Bag
- User manual.
Frequently Bought Together
(*All information is plus legal VAT) This article
€ 204.99*
€ 8.99*
Total price:
€ 264.46*
What kind of Insulation Testers are you looking for?
Accessories
(*All information is plus legal VAT)The necessary accessories are required to use the article as described.
€ 8.99*
More interesting products
(*All information is plus legal VAT)
Sonel MIC-10 Insulation tester Calibrated to (ISO standards) 50 V, 100 V, 250 V, 500 V, 1000 V 10 GΩ
Conrad Electronic
€ 529.00*
€ 1,165.00*
€ 955.00*
€ 1,515.00*
Conrad Electronic
€ 1,775.00*
€ 1,969.00*
€ 985.00*
Conrad Electronic
€ 809.00*
€ 729.00*
€ 885.00*
Conrad Electronic
€ 1,239.00*