1/3
Fischer 92040 FHB-A dyn 16 x 125/50 V Highbond anchor 175 mm 18 mm 10 pc(s)
EAN:
Part number:
Item no:
Technical specifications
- (Ø)
18 mm
- Product type
Highbond anchor
- Material
Steel
- Length
175 mm
- Dim
(Ø x L) 18 mm x 175 mm
- Suitable for
Concrete
- Content
10 pc(s)
- Features
incl. hex nut
- Material properties
zinc galvanized
Documents & Downloads
User & Safety Instructions
User & Safety Instructions 482571 Fischer 92040 FHB-A dyn 16 x 125/50 V Highbond anchor 175 mm 18 mm 10 pc(s)
Description
The fischer Highbond anchor dynamic FHB-A dynamic V is manufactured from electro-galvanised. For the admission of highest lateral forces is the anchor rod on the shaft with a sleeve. The spreizende Highbond anchor is controlled with the high bond special mortar FIS HB processed. While tightening the hex nut, the cones of the anchor rod into the mortar shell pulled against the drill hole wall. The injection mortar FIS HB closes with setting process the ring gap in the add-on and guarantees an optimal load distribution. This allows dynamic threshold and alternating loads to be recorded. The fischer Highbond anchor dynamic FHB-A dynamic V is ideally suited to indoor guide rails of lifts, industrial robots or portal and ceiling running cranes.
This text is machine translated.
This text is machine translated.
Features
- Recording the highest lateral forces. Additional sleeve offers maximum security.
- Recording of dynamic threshold and alternating loads through optimal load distribution
- Safe after spreading with dynamic load of cones geometry
- Approved for cracked concrete.