Image similar
Phoenix Contact MACX-MR-PH-690 1336404 Monitoring relay No. of relay outputs: 2
Product type
Monitoring relay
No. of relay outputs
2
Type
MACX-MR-PH-690
Probe inputs
Messeingang. AC Sinus (48 Hz ... 63 Hz). Spannungseingang: 1 MΩ. Min. Einstellbereich des Schwellwertes Spannung: 160 V. Max. Einstellbereich des Schwellwertes Spannung: 690 V
Dim
(L x W x H) 114 x 22.5 x 109 mm
Datasheet (PDF)
EAN:
Part number:
Item no:
Technical specifications
- Connection type: screw terminals.
- Tightening torque: 0.5 Nm ... 0.6 Nm (5 lb in ... 7 lb in)
- Conductor cross-section flexible: 0.2 mm² ... 2.5 mm².
- Conductor cross-section rigid: 0.2 mm² ... 2.5 mm².
- Wire cross-section AWG: 24 ... 14
- Width 22.5 mm
- Height: 109 mm
- Depth: 114 mm
- Flammability class according to UL 94: V0
- Ambient conditions: Environmental conditions
- Protection class IP40 (casing);IP20 (connection terminals)
- Ambient temperature (operation): -25 °C ... 70 °C
- Ambient temperature (storage/transport): -40 °C ... 85 °C
- Altitude: 2000 meters
- Standards/regulations EN 61000-6-4
- Insulation properties: Insulation properties
- Over voltage category III
- Pollution level 3
- Permissible air humidity (operation): 10 % ... 95 %.
- Stripped length: 10 mm
- All mounting positions permitted
- Frequency range: 48 Hz ... 400 Hz
- Identification GB/T 14048.5
- UL, USA / Canada: UL, USA / Canada
- Maximum power loss at rated conditions 15 W.
- Operating mode: Closed circuit
- Supply voltage range: 24 V DC ... 240 V DC -25 % ... +30 %
- CE CE
- Nominal power consumption 15 VA (1.5 W)
- Function: Asymmetry;Phase sequence;Phase failure
- Installation instructions: On standard rail NS 35 according to EN 60715
- Electromagnetic compatibility: Conformity to EMC directive
- Low-voltage directive: Conformity to the NS directive
- Interference radiation: Interference radiation
- Immunity speed EN 61000-6-2
- Switching voltage maximum 250 V AC
- Supply: Supply
- Contact version 2 potential-free changeover contacts
- Rated insulation voltage 690 V
- Switching: Switching
- Mechanical life: Approx. 3x 107 switching cycles
- Breaking capacity (resistive load) maximum: 2000 VA (8 A/250 V AC)
- Electrical life: Approximately 1x 105 operations, ohmic load 2000 V A
- Rated surge voltage strength 6 kV
- Output fuse 10 A (quick-blow)
- Readiness time 200 ms
- Mains type 3-phase
- Galvanic isolation 300 V
- Naming input: Measuring input
- Measured variable: AC sine (48 Hz ... 63 Hz)
- Temperature coefficient maximum: 0.05 %/K.
- Setting range trigger delay: 0 s ... 99.9 s
- 1 % basic accuracy
- Repeat accuracy 0.5 %
- Insulating material type casing: PBT
- CCC
- Voltage rating: 0.5 %
- Input resistance voltage input 1 MΩ
- Min Adjustment range of the threshold voltage 160 V
- Max. Adjustment range of the threshold voltage 690 V
- Type
MACX-MR-PH-690
- Product type
Monitoring relay
- No. of relay outputs
2
- Probe inputs
Messeingang. AC Sinus (48 Hz ... 63 Hz). Spannungseingang: 1 MΩ. Min. Einstellbereich des Schwellwertes Spannung: 160 V. Max. Einstellbereich des Schwellwertes Spannung: 690 V
- Dim
(L x W x H) 114 x 22.5 x 109 mm
- Width
22.5 mm
- Height
109 mm
- Length
114 mm
- Depth
114 mm
- UKCA
yes
Documents & Downloads
Datasheet
Datasheet 3582905 Phoenix Contact MACX-MR-PH-690 1336404 Monitoring relay No. of relay outputs: 2
User & Safety Instructions
User & Safety Instructions 3582905 Phoenix Contact MACX-MR-PH-690 1336404 Monitoring relay No. of relay outputs: 2
Description
3-phase voltage monitoring relay, wide-range power supply with 24 V AC/DC … 240 V AC/DC, monitoring of phase sequence, phase failure and asymmetry (with adjustable asymmetry and response delay). Configuration is possible via Smartphone APP via wireless NFC communication, 1x2 outputs for PDT low-current contacts, closed-circuit principle, automatic reset, optional screw connection and plug connection.
This text is machine translated.
This text is machine translated.