Image similar
Phoenix Contact MINI MCR-2-T-2RO 2906876 Limit switch 1 pc(s)
Product type
Limit switch
Type
MINI MCR-2-T-2RO
Dim
(L x W x H) 119.2 x 6.2 x 109.81 mm
Connection
Screws
Micro USB type B
Output (voltage)
30 V DC
Datasheet (PDF)
EAN:
Part number:
Item no:
Technical specifications
- MINI Analog Pro product family
- Connection type: Micro USB type B.
- M3 screw thread
- Tightening torque: 0.5 Nm ... 0.6 Nm
- Conductor cross-section flexible: 0.14 mm² ... 2.5 mm².
- Conductor cross-section rigid: 0.2 mm² ... 1.5 mm² (with wire-end sleeve);0.14 mm² ... 2.5 mm² (without ferrule)
- Wire cross-section AWG: 24 ... 12 (flexible)
- Width 6.2 mm
- Height: 109.81 mm
- Depth: 119.2 mm
- Colour: Grey (RAL 7042)
- Material: housing: PBT
- Ambient conditions: Environmental conditions
- Protection type IP20 (not rated by UL)
- Ambient temperature (operation): -40 °C ... 70 °C
- Ambient temperature (storage/transport): -40 °C ... 85 °C
- Altitude: ≤ 2000 m.
- Standards/regulations: GB 3836.1;GB 3836.8
- Note: Small deviations may occur during interference.
- Mounting type: Rail mounting
- Overvoltage category II
- Pollution level: 2
- Permissible air humidity (operation): 5 % ... 95% (no condensation)
- Stripped length: 10 mm
- All mounting positions permitted
- ATEX
- IECEx: IECEx
- Identification: 2Ex ec IIC T4 GC
- UL, USA / Canada: UL, USA / Canada
- Fire protection for rail vehicles (DIN EN 45545-2) R22: HL 1 - HL 2
- Fire protection for rail vehicles (DIN EN 45545-2) R23: HL 1 - HL 2
- Fire protection for rail vehicles (DIN EN 45545-2) R24: HL 1 - HL 2
- Supply voltage range: 9.6 V DC ... 30 V DC (to bridge the supply voltage the mounting rail bus connector (ME 6.2 TBUS-2 1.5/5-ST-3.81 GN, item no. 2869728) can be used, snap-on to 35 mm mounting rail according to EN 60715)
- CE CE
- Certificate: BY/112 02.01 TP012 103.01 00081
- 2, 3 and 4 conductors connection technology
- Signal
- Mounting instructions: For bridging the power supply can be used by the mounting rail bus connector, can be snapped onto 35-mm mounting rail according to EN 60715.
- Electromagnetic compatibility: Conformity to EMC directive
- Interference radiation: Interference radiation
- Ship building approval: Ship building approval
- Immunity speed EN 61000-6-2
- Switching voltage maximum 30 V DC
- Status display: Green LED (supply voltage);yellow LED (switch output)
- Galvanic isolation between input and output: Yes
- Supply: Supply
- Power consumption typical 20 mA (12 V DC);10 mA (24 V DC)
- Number of channels: 1
- Usage restriction: Use restriction
- EMC note: EMC: Class A product, see manufacturer's declaration in the download area
- Insulation: Reinforced insulation
- Contact version 2 closer
- Shipbuilding data: Shipbuilding data
- Temperature B
- Humidity b
- Vibration A
- EMC A
- Enschnung: Schutzabdeckung auf die Reihenklemme am Schallend beiliegende Schutzabdeckung auf
- Rated insulation voltage 300 Veff
- Testing voltage 3 kV AC (50 Hz, 60 s)
- Functionality: Functionality
- CCC / China-Ex: CCC / China-Ex
- GB standard GB standard
- Number of outputs: 2
- Rated supply voltage 24 VDC
- Galvanic isolation: Galvanic isolation
- Temperature coefficient maximum: 0.01 %/K.
- Power consumption: 350 mW
- Configuration: DIP switch, software, APP
- Number of inputs: 1
- Maximum switching current 100 mA (30 V)
- Ex-Installation (EPL): GC;Div. 2
- Error display: Red LED
- EAC ex: EAC ex
- Galvanic isolation Input / Output / Supply IEC / EN 61010-1: Galvanic isolation Input / Output / Supply IEC / EN 61010-1
- Max. Permissible total line resistance: ≤ 25 Ω (for each line, RTD in 3 or 4 wire technology);≤ 50 Ω (adjustable, RTD in 2 wire technology)
- Measuring: Measuring
- Suitable sensor types (RTD): Pt, Ni, Cu sensors
- Linear resistance range: 0 Ω ... 4000 Ω (RTD)
- Sensor feed current 200 µA (RTD)
- Temperature measuring range: -250 °C ... 2500 °C (RTD)
- Measuring range temperature: ≥ 20 K (RTD)
- SUITABLE SENSOR TYPES (TC): B, E, J, K, N, R, S, T, L, U A-1, A-2, A-3, M, L
- Step response (0-99%): 300 ms;570 ms;380 ms;300 ms;570 ms
- MV signal range linear: -500 mV ... 500 mV (RTD)
- Configurable/Programmable: Yes
- Applicable input sources: Resistance thermometers; thermocouples
- Switching: Transistor: Switching: Transistor
- Switch point accuracy < 0.1%
- Temperature measuring range: B: 500 °C ... 1820 °C
- Temperature measuring range: E: -230 °C ... 1000 °C
- Temperature measuring range: J: -210 °C ... 1200 °C
- Temperature measuring range: K: -250 °C ... 1372 °C
- Temperature measuring range: N: -200 °C ... 1300 °C
- Temperature measuring range: R: -50 °C ... 1768 °C
- Temperature measuring range: S: -50 °C ... 1768 °C
- Temperature measuring range: T: -200 °C ... 400 °C
- Temperature measuring range: L: -200 °C ... 800 °C
- Temperature measuring range: U: -200 °C ... 600 °C
- Temperature measuring range: A-1: 0 °C ... 2500 °C
- Temperature measuring range: A-2: 0 °C ... 1800 °C
- Temperature measuring range: A-3: 0 °C ... 1800 °C
- Temperature measuring range: M: -200 °C ... 100 °C
- Data: IFS Interface: Data: IFS Interface
- EAC ex: EAC ex
- Type
MINI MCR-2-T-2RO
- Product type
Limit switch
- Dim
(L x W x H) 119.2 x 6.2 x 109.81 mm
- Connection
Screws
Micro USB type B
- Output (voltage)
30 V DC
- Output (current)
100 mA
- Input signal (voltage)
-500 mV ... 500 mV
- Content
1 pc(s)
- Configuration
DIP switch
- Width
6.2 mm
- Height
109.81 mm
- Length
119.2 mm
- Max. ambient temperature
70 °C
- Min. ambient temperature
-40 °C
- Supply voltage (num.)
24 V DC
- Operating voltage U(B)
9.6 V DC ... 30 V DC
- Cross section (flexible) (max.)
2.5 mm²
- Cross section (inflexible) (max.)
2.5 mm²
- Cross section (flexible) (min.)
0.14 mm²
- Cross section (inflexible) (min.)
0.2 mm²
- Depth
119.2 mm
IP20
- UKCA
yes
Documents & Downloads
Datasheet
Datasheet 3579986 Phoenix Contact MINI MCR-2-T-2RO 2906876 Limit switch 1 pc(s)
User & Safety Instructions
User & Safety Instructions 3579986 Phoenix Contact MINI MCR-2-T-2RO 2906876 Limit switch 1 pc(s)
Description
Universally configurable temperature limit switch with two transistor outputs for the connection of 2 -, 3 -, 4-conductor resistance thermometers and thermocouples. Can be configured via DIP switch or software, screw connection technology
This text is machine translated.
This text is machine translated.