Proxxon Micromot 28 941 Three-jaw Steel Drill Chuck
EAN:
Part number:
Item no:
Number
Total (€ 4.19 / piece)
€ 7.55
-45 %
€ 4.19
plus VAT.
Highlights & Details
3-jaw steel chuck
- For all prepared MICROMOT devices
- Advantageous when working with different shafts
- Capacity 0.3 - 3.2mm
Technical specifications
- Product type
Quick-release chuck
- Compatible with
Proxxon Micromot
- Clamping range
0.3 - 3.2 mm
- UKCA
yes
Documents & Downloads
User & Safety Instructions
User & Safety Instructions 813507 Proxxon Micromot 28 941 Three-jaw Steel Drill Chuck
Description
For all MICROMOT devices preset for it. Particularly beneficial for all tasks with different shafts. Clamping range from 0.3 - 3.2 mm. For PROXXON MICROMOT machines of FBS 240/E, FBS 12/EF types, driller and milling machine 50/EF, bending shaft 110/BF.
Drill chuck or collet?
Drill chucks provide more convenience to quickly change the tools when working with shafts of varying diameters (e.g. HSS drills as per DIN 338). However, because of their technical setup, they have a few drawbacks compared to collets (Order nr. 808482): Less clamping force and higher concentricity tolerances. If high precision is necessary, then working with MICROMOT steel collets is a must.
Drill chuck or collet?
Drill chucks provide more convenience to quickly change the tools when working with shafts of varying diameters (e.g. HSS drills as per DIN 338). However, because of their technical setup, they have a few drawbacks compared to collets (Order nr. 808482): Less clamping force and higher concentricity tolerances. If high precision is necessary, then working with MICROMOT steel collets is a must.
Hints
Drill chuck offers more comfort by quick tool change while working with shafts of different thickness (suchAs HSS driller as per DIN 338). On the basis of its technical structure, they however have drawbacks against chuck: Lower clamping force and higher runout tolerances. If you require high precision, you should certainly work with MICROMOT steel chucks.