TinkerForge 111 HAT module Multicolour Suitable for (single board PCs) TinkerForge 1 pc(s)

THE HAS Brick is a Raspberry Pi IN the standard HAS form factor. The brick is compliant with THE HAS specification and works automatically with Raspbian without any changes.

With the, Brick can connect up to eight Bricklets to a Raspberry Pi.

THE HAS Brick has 7-pin Bricklet connectors. <>Bricklets can be connected to the brick via a 7-pin - 7-pin cable. Only Bricklets with a 7-pin connector are supported.

The Raspberry Pi can be operated via THE HAS Brick with an external 5V-28V DC power supply. The integrated power supply provides stable 5V for the Raspberry Pi even under heavy load. Thus also connected Bricklets and connected USB devices can be supplied. THIS HAS Brick supplies a slightly increased voltage of 5.3V for this.

Alternatively, Brick and Raspberry Pi CAN also be supplied via micro USB. In this case, however, it must be ensured that the power supply provides stable 5V. This is possible, for example, with the official Raspberry Pi universal power supply. The USB/DC supply voltages are measured by THE AND are accessible via the API.

THE HAS Brick offers a real-time clock with battery backup that is directly connected to the Raspberry Pi. This allows the Raspberry Pi to be switched off for a specified time. The Raspberry Pi can therefore also be used in battery-operated applications, for example in an application in which sensor information is to be sent to the cloud every hour.

With the, Brick can implement a watchdog that restarts the Raspberry Pi if it hangs up or if its own program gets stuck.

THE HAS Brick is electronically compatible with the Raspberry Pis 2B, 3B, 3B+, 4B, Zero and Zero W. The mounting holes are compatible with the Raspberry Pi 2/3/4. In addition, Zero Brick HAS a smaller version with mounting holes compatible with the Raspberry Pi Zero.

This text is machine translated.