1/4
Metz Connect 1309427103-E Network outlet DIN rail CAT 6 Light grey
EAN:
Part number:
Item no:
Datasheet (PDF)
Number
Total (€ 10.92 / piece)
€ 10.92
plus VAT.
BTR CAT 6 Network socket is not suitable for fitting cap rail CAT 6
Highlights & Details
- Mounting on TH35 rail as per DIN EN 60715
- Cable routing can be done 45° from top or bottom, insertion direction is tilted at 45° from bottom
- Integrated dust protective cover
Technical specifications
- Product type
Network outlet
CAT 6
- Similar RAL
7035
- Factory colour
Light grey
- Mounting type
DIN rail
- Content
1 pc(s)
- Type
Insert
- Cable feed
top
bottom
- Category
CAT 6
- Features
Compact
- No. of LAN ports
1 x
- Fitting type (details)
DIN rail
- Weight
0.024
- UKCA
not relevant
Documents & Downloads
Datasheet
Datasheet 975992 Metz Connect 1309427103-E Network outlet DIN rail CAT 6 Light grey
User & Safety Instructions
User & Safety Instructions 975992 Metz Connect 1309427103-E Network outlet DIN rail CAT 6 Light grey
User & Safety Instructions 975992 Metz Connect 1309427103-E Network outlet DIN rail CAT 6 Light grey
Description
Network socket in the form of a circuit breaker. The socket insert is completely shielded and authorised for Cat 6. The socket is mounted like a circuit breaker on a standard DIN rail. Plug direction 90º to the DIN rail. Cable routing from top or bottom. For changing the direction of cable routing, only the lower part of the 2-piece housing is twisted and again latched onto the TH35 rail. All connection modules can be used in modular design in REGplus IP20 module. With installation as a device of Safety Class I, the equipotential bonding takes place directly on the rail via an integrated equipotential bonding plate. The rail is integrated in the building equipotential bonding via appropriate measures. The device is protected by a cover against direct contact. The protection class II remains if mounted in insulation-protective distributor. For this purpose, the equipotential bonding must be removed.
Features
- The overall width of 1RU allows installation of up to 12 REGs in standard electrical distributor
- Suitable module for cable routing 45° from the top: Cat 6 A module 180°, E-DAT module 8(8), and E-DAT module coupling 180°
- Suitable module for cable routing 45° from the bottom: Cat 6 A module 270° and E-DAT module coupling 90°
- Module Cat5e and Cat 6, OpDAT module LC-D and ST as well as coax modules
- Not suitable for modules in Keystone design and Cat 6 A module 90°
Hints
Not suitable for modules in Keystone design and Cat 6 A module 90°