Image similar
Phoenix Contact 1135740 PTCB E1 24DC/6A SI-R Eelectronic RCCB 1 pc(s)
Product type
Eelectronic RCCB
Type
Support rail module one piece
Connection
Push-in spring-loaded terminal
IP rating
IP20
Length
55.6 mm
Datasheet (PDF)
EAN:
Part number:
Item no:
Technical specifications
- Product family: PTCB
- Designed: Single piece mounting rail module
- Number of poles: 1
- Push-in connection
- Conductor cross-section flexible: 0.2 mm² ... 2.5 mm².
- Conductor cross-section rigid: 0.2 mm² ... 4 mm².
- Wire cross-section AWG: 24 ... 12
- Width 6.2 mm
- Height: 1.8" (105.8 mm)
- Depth: 55.6 mm (including mounting rail 7.5 mm)
- Colour: Grey (RAL 7042)
- Flammability class according to UL 94 V-0
- Ambient conditions: Environmental conditions
- Protection class: IP20
- Ambient temperature (operation): -30 °C ... 60 °C
- Ambient temperature (storage/transport): -40 °C ... 70 °C
- Altitude: ≤ 3000 m to 52 °C (amsl);≤ 4000 m to 46 °C (amsl)
- Standards/regulations EN 45545-2
- Note: Railway applications - Fire protection in railway vehicles - Part 2: Fire performance requirements for materials and components
- Mounting type: Rail: 35 mm
- Insulation properties: Insulation properties
- Pollution level: 2
- Shock (Operation): 30g (IEC 60068-2-27, Test EA)
- Vibration (operation): 10 Hz ... 59.6 Hz (amplitude ±0.35 mm | according to IEC 60068-2-6, test FC);59.6 Hz ... 150 Hz (acceleration 5g | according to IEC 60068-2-6, test FC);5 Hz ... 100 Hz (Resonance search 4g | Resonance frequency 4g | 90 min according to DNV GL Class B)
- Operating voltage: 18 V DC ... 30 V DC
- Stripped length: 8 mm
- General: General
- Voltage strength: Max. 35 V DC (load circuit)
- Conductor cross-section flexible with wire-end sleeve with plastic sleeve: 0.2 mm² ... 2.5 mm².
- Conductor cross-section flexible with wire-end sleeve without plastic sleeve: 0.2 mm² ... 2.5 mm².
- Identification: ISA S71.04.2013 G3 Harsh Group A
- Material: PBT; PBT
- Fuse: Electronic
- Power loss: Type 0.15 W (at idle);< 1.4 W (at rated)
- Rated voltage 24 V DC
- Protection class III
- Output voltage: 24 Vdc (fault);0 Vdc (no fault)
- Input voltage range: 7 V DC ... 30 V DC (reset with falling edge)
- Current consumption: Type 0.4 mA at 24 V
- Efficiency level > 99 %
- Regenerative resistance: Max. 35 V DC
- MTBF (IEC 61709, SN 29500): 26315789 h (at 25 °C with 21 % load);11904761 h (at 40 °C with 34.25 % load);1369863 h (at 60 °C with 100 % load)
- Voltage: < 5 Vdc (low state);> 8 Vdc (high state)
- Ship building approval: Ship building approval
- Pollutant test: Pollutant gas test
- UL-approval: UL-approval
- Output current: Max. 0.015 A (short circuit-proof)
- Contact design: Without galvanic separation
- Shipbuilding data: Shipbuilding data
- Temperature D
- Humidity b
- Vibration B
- EMC B
- Enclosure A.
- Dimensioning surge voltage: 0.5 kV
- Load circuit: Load circuit
- Trigger type E (electronic)
- Necessary backup: Only required if Imax of the supply > short-circuit switching capacity. Integrated fail-safe element.
- Quiescent current I0: Type 8 mA
- Temperature derating: 21 A (total current at 60 °C);24 A (total current at 50 °C);6 A (channel current at 60 °C);6 A (channel current at 50 °C)
- Voltage drop 0.16 V (at 6 A)
- 15 A DC. Fail-safe element
- Switch-off time: ≤ 10 ms (short circuit > 2.0 x IN);1 s (1.2 ... 2.0 X IN)
- Low-voltage cut-off: ≥ 17.8 V DC (active); ≤ 18.8 V DC (inactive)
- Max. Capacity load: 24000 µF (depending on current setting and available short circuit current)
- Reset
- Pulse length ≥ 50 ms (high);≥ 50 ms (low)
- Status output: Status output
- Moisture testing 96 h, 95 % RH, 40 °C.
- Rated current IN:24 A DC (Total current input);6 A DC (Rated current output)
- Short circuit switching capacity 300 A.
- Rated current (preset): 6 A.
- Tolerance I ± 15%
- Overvoltage cut-off: ≥ 30.5 V DC (active);≤ 29.5 V DC (inactive)
- Channel LED off: Off (channel off)
- Channel LED yellow: Lit (channel on, channel utilization > 80 %);flashing (programming mode active)
- Channel LED green: Lights up (channel on)
- Red channel LED: Lights up (channel switched off, over or undervoltage active); lights up temporarily (channel switched off, cool -down phase 5 s, overload or short-circuit triggering); flashes (channel switched off, restart ready, overload or short-circuit triggering); flashes quickly (channel switched off, external voltage at the output, possible installation error)
- Module initialization time: < 0.55 s
- Waiting time after switch-off of a channel: 5 s (in case of overload / short circuit)
- Main circuit IN+: Main circuit IN+
- Main circuit IN-: Main circuit IN-
- OUT main circuit: OUT main circuit
- Product type
Eelectronic RCCB
- Type
Support rail module one piece
- Connection
Push-in spring-loaded terminal
IP20
- Length
55.6 mm
- Width
6.2 mm
- Height
105.8 mm
- Compatible with (details)
35 mm mounting rail
- Content
1 pc(s)
- Type
PTCB E1 24DC/6A SI-R
- Dim
(L x W x H) 55.6 x 6.2 x 105.8 mm
- Depth
55.6 mm
- Operating voltage
30 V
- UKCA
not relevant
Documents & Downloads
Datasheet
Datasheet 3564823 Phoenix Contact 1135740 PTCB E1 24DC/6A SI-R Eelectronic RCCB 1 pc(s)
User & Safety Instructions
User & Safety Instructions 3564823 Phoenix Contact 1135740 PTCB E1 24DC/6A SI-R Eelectronic RCCB 1 pc(s)
Description
Electronic device protection switch E (electronic), 1-pin, trip characteristic: Electronic, mounting type: Support rail: 35 mm, rated current: 24 A
This text is machine translated.
This text is machine translated.