Image similar
Phoenix Contact AXL SE UTH4 EF 1182068 Temperature module 24 V DC
Datasheet (PDF)
EAN:
Part number:
Item no:
Technical specifications
- Product family: Axioline Smart Elements
- Modular design
- Push-in connection
- Conductor cross-section flexible: 0.25 mm² ... 1.5 mm².
- Conductor cross-section rigid: 0.25 mm² ... 1.5 mm².
- Wire cross-section AWG: 24 ... 16
- Width 14.9 mm
- Height: 62.2 mm
- Depth: 62 mm
- Ambient conditions: Environmental conditions
- Protection class: IP20
- Ambient temperature (operation): -25 °C ... 60 °C
- Ambient temperature (storage/transport): -40 °C ... 85 °C
- Mounting type: Plug-in mounting (Smart element slot)
- Insulation properties: Insulation properties
- OVERVOLTAGE CATEGORY II (IEC 60664-1, EN 60664-1)
- Pollution level 2 (IEC 60664-1, EN 60664-1)
- Permissible air humidity (operation): 5 % ... 95% (no condensation)
- Naming of connection: Peripherals
- Stripped length: 8 mm
- Mounting position: See system in which you insert the Smart element.
- Transmission Speed: See the system in which you are using the Smart element.
- Conductor cross-section flexible with wire-end sleeve with plastic sleeve: 0.25 mm² ... 1.5 mm².
- Conductor cross-section flexible with wire-end sleeve without plastic sleeve: 0.25 mm² ... 1.5 mm².
- Maximum power loss at rated conditions 0.75 W.
- PROTECTION CLASS III (IEC 61140, EN 61140, VDE 0140-1)
- Number of interfaces: 1
- Air pressure (operation): 70 kPa ... 106 kPa (up to 3000 m üNN)
- Supply voltage range: 19.2 V DC ... 30 V DC (including all tolerances, including ripple)
- Connection technology: Connection technology
- Permissible humidity (storage/transport): 5 % ... 95% (no condensation)
- Note for application: Only for industrial use
- Power consumption: Min. 16 mA (without connected peripherals)
- Wire connection: Conductor connection
- Protective circuit: Overvoltage protection | See the system in which you are using the Smart element.;Reverse polarity protection | Reverse polarity protection diode
- Air pressure (storage/transport): 70 kPa ... 106 kPa (up to 3000 m üNN)
- Note on connection type: Refer to the information on the conductor cross-sections in the "Axioline Smart ELEMENTS" user manual.
- Naming input: External reference junction (can also be used as an additional Pt-100 sensor input)
- Input description: Inputs for thermocouples or linear voltage
- Number of inputs: 1
- Analogue::: Analogue:
- Input filter time 120 ms
- Power supply 24 Vdc (through card-edge connector)
- Suitable sensor types (RTD): Pt 100
- COMPATIBLE SENSOR TYPES (TC): B, C, E, J, K, L, N, R, S, T, U, W, HK, mV input
- Module
- ID code (HEX): None
- 80-bit process data channel
- Input address space: 10 bytes
- Output address space: 10 bytes
- Need for parameter data: 21 bytes
- Need for configuration data: 6 bytes
- Potential separation/insulation of the voltage ranges: Potential separation/insulation of the voltage ranges
- Measured value display 16 bit (15 bit + sign)
- Test voltage: 24 V supply (peripheral) / Functional ground: 500 V AC, 50 Hz, 1 min.
- Tolerance, relative: Typical. 0.01 % ( K-type thermocouple, NiCr-Ni); see tolerance tables
- Tolerance, absolute: Type. ± 0.27 K (thermocouple type K, plus tolerance of the reference junction); see tables for tolerance specifications
- Smart element interface Smart element interface
- Potential: Smart Elements logic supply (USE): Potential: Smart Elements logic supply (USE)
- Start time to operational readiness: < 500 ms
- Potential: Peripheral supply (UP): Potential: Peripheral supply (UP)
- Test voltage: Power supply logic/24-V supply (peripheral): 500 V AC, 50 Hz, 1 min.
- Testing voltage: Supply logic/functional earthing: 500 V AC, 50 Hz, 1 min.
- Peripherals: Peripherals
- Product type
Temperature module
- Type
AXL SE UTH4 EF
- No. of analogue inputs
4
- No. of inputs (max.)
5
- No. of inputs
5 x
- Operating voltage
24 V DC
- Height
62.2 mm
- Length
62 mm
- Width
14.9 mm
IP20
- Dim
(L x W x H) 62 x 14.9 x 62.2 mm
- Connection method
2-, 4-core
- Connection
Push-in wire connector
- Max. current consumption
28 mA
- Manufacturer part #
1182068
- Type
modular
- Fitting type (details)
Smart element slot
- Max. ambient temperature
60 °C
- Min. ambient temperature
-25 °C
- Depth
62 mm
- UKCA
yes
Documents & Downloads
Datasheet
Datasheet 3565516 Phoenix Contact AXL SE UTH4 EF 1182068 Temperature module 24 V DC
User & Safety Instructions
User & Safety Instructions 3565516 Phoenix Contact AXL SE UTH4 EF 1182068 Temperature module 24 V DC
Description
Axioline Smart Elements, temperature measuring module, analog inputs: 4 (inputs for thermocouples or linear voltage), connection technology: 2-wire (shielded, twisted pair), external reference junction (can also be used as additional Pt-100 sensor input): 1, connection technology: 4-wire, protection class: IP20
This text is machine translated.
This text is machine translated.