1/11
Renkforce RF-1601832 Network extender Two-wire Range (max.): 500 m 1 pc(s) 100 Mbps PoE
EAN:
Part number:
Item no:
Datasheet (PDF)
Number
Total (€ 84.03 / piece)
€ 84.03
plus VAT.
Highlights & Details
Renkforce network extension adapter via network cable/2-wire cable up to 500 m
- Uses existing UTP/2-wire cable cable infrastructure to IP devices, such as IP cameras in operation
- A master adapter supports the connection of up to 4 Slave Adapters
- Powered by C4 Line
Technical specifications
- Product type
Network extender
- Content
1 pc(s)
- Transfer type
Two-wire
- Range (max.)
500 m
- Bit rate (max.)
100 Mbps
- Interfaces
LAN (10/100 Mbps)
- Width
103 mm
- Height
42 mm
- Length
40 mm
- Weight
115 g
- Features
PoE
Documents & Downloads
Datasheet
Datasheet 800916 Renkforce RF-1601832 Network extender Two-wire Range (max.): 500 m 1 pc(s) 100 Mbps PoE
Datasheet 800916 Renkforce RF-1601832 Network extender Two-wire Range (max.): 500 m 1 pc(s) 100 Mbps PoE
User & Safety Instructions
User & Safety Instructions 800916 Renkforce RF-1601832 Network extender Two-wire Range (max.): 500 m 1 pc(s) 100 Mbps PoE
Conformity certificate
Conformity certificate 800916 Renkforce RF-1601832 Network extender Two-wire Range (max.): 500 m 1 pc(s) 100 Mbps PoE
Description
With this adapter can also be used in buildings without structured network cabling modern high-speed networks for data communication. The Range Extender uses in the building existing CAT. 5e, CAT. 6 or 2-wire telephone lines for data transfer.
With this range extender can also be now also twisted pair telephone lines to data communication with high performance. This is especially beneficial when W-LAN or powerline solutions building due to their limits. This can be used, depending on the technical conditions transfer rates of up to 100 Mbit/s on a cable length of up to 500 meters.
Apply this adapter as soon as modern IP cameras to an existing 2-wire line or CAT. 5e/6 cable to be installed.
Power supply on one side is enough. The converter control PoE (IEEE802.3at) and transfer the energy using the 2-wire cable. This provides a converter is the (or) other converter with current. There is even a full-fledged PoE Lan-Port. I.e. IP cameras could also be supplied with energy.
This text is machine translated.
With this range extender can also be now also twisted pair telephone lines to data communication with high performance. This is especially beneficial when W-LAN or powerline solutions building due to their limits. This can be used, depending on the technical conditions transfer rates of up to 100 Mbit/s on a cable length of up to 500 meters.
Apply this adapter as soon as modern IP cameras to an existing 2-wire line or CAT. 5e/6 cable to be installed.
Power supply on one side is enough. The converter control PoE (IEEE802.3at) and transfer the energy using the 2-wire cable. This provides a converter is the (or) other converter with current. There is even a full-fledged PoE Lan-Port. I.e. IP cameras could also be supplied with energy.
This text is machine translated.
Scope of delivery
- Network extension adapter
Hints
According to IEEE 802.3at entnehmende remains the maximum performance for all devices together at 30 watts. Please note, in particular if more than two adapters are connected together and additionally even two cameras or more, you want to be powered via PoE. When PoE operation for sufficiently dimensioned power feed. The corresponding power supply unit is not enclosed but needs to be purchased separately.