Anybus AB7612 Modbus-RTU Slave/J1939 Gateway Modbus-RTU 24 V DC 1 pc(s)

AnyBus X gateway – Modbus RTU Slave – J1939
The AnyBus X gateway connects a Modbus RTU serial network to a J1939 (CAN) commercial vehicle network. The gateway is a slave in the Modbus network and allows the Modbus master to read and write data in the J1939 network.
SIMPLE COMMISSIONING - NO PROGRAMMING REQUIRED
HMS provides a free Windows-based configuration tool (BWConfig) for the X-gateway. This PC-based software allows users to assign J1939 parameter data (PGN) to a memory area that can be addressed via the gateway's Modbus RTU interface


During configuration, an I/O table is created with selected J1939 PGNs that are read or written from the J1939 network. The configuration tool BWConfig assigns the I/O table to an address range that is accessible to the Modbus RTU interface of the gateway.

The configuration is loaded from the PC to THE X-gateway'S FLASH memory via an RS-232 connection.

Features and benefits
Monitor and control commercial vehicle J1939 network data from a Modbus RTU PLC system or Modbus RTU device
Typical applications/industries: Power generators, oil & gas, marine, utility and heavy duty vehicles, diesel engine-based systems with J1939 support
Max 500 bytes of I/O data in each direction
Simple configuration with the Windows-based software BWConfig, no programming required
Robust aluminum stand-alone housing
Qualified, technical support

This text is machine translated.