Ixxat 021620 CM CANopen Expansion card CAN bus, D-SUB9, S7-1200 5 V DC 1 pc(s)
EAN:
Part number:
Item no:
Datasheet (PDF)
Number
Total (€ 584.03 / piece)
€ 584.03
plus VAT.
Only 3 Piece(s) available
Highlights & Details
CA Nopen-Baugruppe (Master/Slave) for SIMATIC ® S7-1200 PLC
- Connection of up to 16 CA Nopen-Slave-node in master mode
- 256 bytes of input and 256 bytes of output data per module
- Connection of up to 3 modules per CPU
Technical specifications
- Storage temperature -40 °C to + 70 °C (out of operation)
- Housing plastic housing, plug-in assembly, protection class IP20, DIN rail mounting is possible
- Potential separation galvanic isolation on the subnet
- Approvals: CE, UL, cUL & ROHS.
- Product type
Expansion card
- Interfaces
CAN bus
D-SUB9
S7-1200
- Type
CM CANopen
- Operating voltage
5 V DC
- Max. operating temperature
60 °C
- Min. operating temperature
0 °C
- Operating temperature
0 up to 60 °C
- Dim
(W x H) 72 mm x 100 mm
- Max. current consumption
200 mA
- Height
100 mm
- Width
72 mm
- Manufacturer part #
021620
IP20
- UKCA
yes
- Plastic free packaging
Plastic-free packaging
Documents & Downloads
Datasheet
Datasheet 1386526 Ixxat 021620 CM CANopen Expansion card CAN bus, D-SUB9, S7-1200 5 V DC 1 pc(s)
User & Safety Instructions
User & Safety Instructions 1386526 Ixxat 021620 CM CANopen Expansion card CAN bus, D-SUB9, S7-1200 5 V DC 1 pc(s)
Description
With the CM CANopen you can use devices that CAN 2.0A CANopen or simply with a SIMATIC S7-1200 PLC. The S7-1200 via this module with CAN/CANopen-based devices communicate, which gives you a wider range of automation solutions for your system opens up.
Supports CANopen and CAN 2.0A
Insert the expansion module CM CANopen simply to the SIMATIC S7-1200 PLC to devices that use CANopen or CAN 2.0A, into the network. As soon as the module with the S7-1200 is connected, you can configure the CM canopen module in the TIA Portal. The CA Nopen-Netzwerk is with the Configuration Studio software of the module is configured.
The CM canopen module can be configured as master or as a slave. This is no programming required.
This text is machine translated.
Supports CANopen and CAN 2.0A
Insert the expansion module CM CANopen simply to the SIMATIC S7-1200 PLC to devices that use CANopen or CAN 2.0A, into the network. As soon as the module with the S7-1200 is connected, you can configure the CM canopen module in the TIA Portal. The CA Nopen-Netzwerk is with the Configuration Studio software of the module is configured.
The CM canopen module can be configured as master or as a slave. This is no programming required.
This text is machine translated.