Ixxat 1.01.0211.20000 CAN/FD Repeater Standard CAN/CAN FD repeater CAN bus I/O number: 2 1 pc(s)
EAN:
Part number:
Item no:
Datasheet (PDF)
Number
Total (€ 284.87 / piece)
€ 284.87
plus VAT.
Only 3 Piece(s) available
Highlights & Details
CAN/CAN FD repeater with push-in connector and 5 kV isolation voltage
- Protection of network segments up to 5 kV
- Removable push-in connectors with spring clamp mechanism enable quick installation and maintenance without the need for additional tools
- Almost no effect on real-time behavior
- Greater flexibility in the design of CAN FD networks
- Disconnects a defective segment so that the rest of the network can continue working
Technical specifications
- Interfaces: CAN FD, push-in connector
- CAN bit rates: Up to 1 Mbit/s.
- CAN/CAN FD bit rates: 14 kBit/s up to 8000 kBit/s.
- CAN terminator: For each CAN/CAN FD channel; separately switchable by piano switch
- Throughput delay: Type. 175 ns (corresponds to approx. 35 m cable length)
- Electrical decoupling: CAN-CAN and CAN-Power with at least 5 kV DC for 1 minute; CAN shield against earth and Power against earth with at least 2 kV DC for 1 minute
- Housing: Plastic top-hat rail housing
- Product type
CAN/CAN FD repeater
- Interfaces
CAN bus
- Type
CAN/FD Repeater Standard
- Max. operating temperature
70 °C
- Min. operating temperature
-20 °C
- Operating voltage
10 to 30 V +-0 %
- Operating temperature
-20 up to 70 °C
- I/O number
2
- Dim
(W x H) 27 mm x 109 mm
- Height
109 mm
- Width
27 mm
- Manufacturer part #
1.01.0211.20000
- Plastic free packaging
Plastic-free packaging
Documents & Downloads
Datasheet
Datasheet 3407503 Ixxat 1.01.0211.20000 CAN/FD Repeater Standard CAN/CAN FD repeater CAN bus I/O number: 2 1 pc(s)
User & Safety Instructions
User & Safety Instructions 3407503 Ixxat 1.01.0211.20000 CAN/FD Repeater Standard CAN/CAN FD repeater CAN bus I/O number: 2 1 pc(s)
Information
Information 3407503 Ixxat 1.01.0211.20000 CAN/FD Repeater Standard CAN/CAN FD repeater CAN bus I/O number: 2 1 pc(s)
Description
The Ixxat CAN/FD repeater standard with two CAN/CAN FD interfaces is used for the galvanic separation of two segments of a CAN network and offers very high galvanic isolation of up to 5 kV, making it also suitable for demanding applications. It can be used for increasing the load capacity of the CAN bus with nodes, for the physical coupling of CAN/CAN FD bus systems or for inserting a galvanic separation.
The repeater provides the necessary flexibility to optimize the structure of CAN/CAN FD networks and to free CAN networks from the restriction to the bus structure. Integrated bus terminating resistors prevent reflections at the cable ends and ensure optimum communication.
As an advantageous feature, the CAN repeater separates a defective segment from the rest of the network, allowing the remaining network to continue working. Once the fault has been corrected, the segment is automatically reconnected to the network.
The galvanic separation is designed for both the CAN/CAN FD segments and the supply voltage and reliably increases the protection of the device against damage to the electronics by voltage peaks.
This text is machine translated.
The repeater provides the necessary flexibility to optimize the structure of CAN/CAN FD networks and to free CAN networks from the restriction to the bus structure. Integrated bus terminating resistors prevent reflections at the cable ends and ensure optimum communication.
As an advantageous feature, the CAN repeater separates a defective segment from the rest of the network, allowing the remaining network to continue working. Once the fault has been corrected, the segment is automatically reconnected to the network.
The galvanic separation is designed for both the CAN/CAN FD segments and the supply voltage and reliably increases the protection of the device against damage to the electronics by voltage peaks.
This text is machine translated.