Remote switch 1.5 mm² Schneider Electric A9A26917

This electrical accessory from Acti9 is a changeover contact (normally open contact/normally closed contact) for displaying the position of the circuit breaker in the event of an electrical fault or tripping. Operating current is between 2mA and 100mA at a frequency of 50Hz to 60Hz at 24VAC to 240VAC & 24VDC to 220VDC. Fault, signal contact. For installation in small businesses, buildings, critical infrastructure, healthcare, industry, in data centers. This electrical accessory is compatible with Acti9 series such as iC60, iID, iDPN ARC, IDPN Vigi, iDPN Vigi ARC, iSW, iC40, iC40 ARC, iCV40, iC40 XA, iCV40 XA and iC60 RCBO. This fault contact is compatible with the Acti9 series such as Acti9 iDT40, iDT40 XA, iDD40 and iKQE RCBO. Screw terminal connection on the underside. The connection permits rigid copper cables. The cable cross-section ranges from 1mm² to 4mm². The ISD is used for either the device short name or the compatibility code. The mechanical indicator is provided on the product for signaling (local). It has a screw terminal connection on the underside. The connection is suitable for rigid copper cables. The cable cross-section ranges from 1mm² to 4mm². With flexible copper cables, screw terminal connection at the bottom enables a cable cross-section from 0.5 mm² to 2.5 mm². Screw terminal connection on the underside. The connection permits rigid copper cables. The cable cross-section of 2 cables allows a cable cross-section of 2.5 mm². It has a screw terminal connection below. Connection is possible flexibly with wire-end sleeve copper cables (2 cables). The cable cross-section is 1.5 mm². The rated insulation voltage (UI) is up to 500 V. The rated surge voltage (Uimp) is 4kV. The width in 9 mm pitch is 1. The dimensions are (W) 9 mm x (H) 86 mm x (D) 73 mm. The color of the product is white (RAL 9003). The degree of contamination is 3. The tropical fitness level is treatment 2. The tightening torque of the connection is 1N.m (bottom) for the screwdriver type PZ1. In accordance with the standard IEC 60529, the IP protection class is IP20. The operating temperature is between -25°C and +70°C. The storage temperature ranges from -40°C to +85°C. This product complies with the standards EN/IEC 60947-5-1 and EN/IEC 60947-5-4. This product is certified with CE and UKCA signs.

This text is machine translated.