Schneider Electric Servo motor SH31401P0AA4000 SH31401P0AA4000 11.1 Nm
Datasheet (PDF)
EAN:
Part number:
Item no:
Number
Total (€ 3,539.00 / piece)
€ 3,539.00
incl. VAT
14-day return policy included
Technical specifications
- Number of phases: 3
- Shaft end design: Other
- Design: Other
- Load cycle: Other
- Rated frequency 50-60 Hz
- Rated voltage: 230 V
- Operating temperature -15 °C
- Suitable for frequency control: No.
- Intrinsic safety (IS): Without
- Insulation class IEC: Other
- Breakdown torque ratio: 27
- Cooling method: Other
- With condensation protection: No.
- With positive temperature coefficient resistor (PTC): No.
- With resistance thermometer detector (RTD): No.
- Motor energy efficiency class: Other
- Voltage type AC
- Housing material: Other
- Overload capability: No.
- Product type
Servo motor
- Flange size
140 mm
- Holding torque
11.1 Nm
- Manufacturer part #
SH31401P0AA4000
- Type
SH31401P0AA4000
- Phases
3
- Nominal torque
11.1 Nm
- Nominal power
2.9 kW
IP65
- Max. ambient temperature
120 °C
- Min. ambient temperature
-15 °C
- Type
Other
- Number of pins
5
Other
AC
230 V
3
Other
5
Other
50-60 Hz
-15-120 °C
IP65
Other
27
FALSE
FALSE
None
FALSE
Other
Other
Other
FALSE
Other
FALSE
- UKCA
not relevant
Documents & Downloads
Datasheet
Datasheet 3756963 Schneider Electric Servo motor SH31401P0AA4000 SH31401P0AA4000 11.1 Nm
User & Safety Instructions
User & Safety Instructions 3756963 Schneider Electric Servo motor SH31401P0AA4000 SH31401P0AA4000 11.1 Nm
Description
Lexium SH3 servomotor for motion-based automation with PacDrive 3. This range of AC servomotors has a low rotor moment of inertia which enables a high acceleration capability for dynamic applications. Owing to the winding technology, a higher power density results in a compact design This servo has a flange dimension of 140 mm and a motor length of 1 stack. Its winding is optimized for torque and speed. It has a continuous standstill torque of 11.1 Nm and a peak torque of 27 Nm. The voltage-dependent rated speed reaches 3000 rpm with a nominal power of up to 2.9 kW. The shaft end is designed as a smooth shaft. The absolute encoder is designed as a single turn with high resolution of 18 bits and transmission via DSL. There is no integrated holding brake. The connection is made via hybrid cable for OMC (One-Motor-Cable) with a M40 connector to corresponding Lexium 62 servo drives. The protection class of the shaft is in IP54 and of the housing in IP65.
This text is machine translated.
This text is machine translated.
What kind of Stepper motors, servo motors are you looking for?
More interesting products
(*All information is plus legal VAT)
€ 27.99*
€ 42.99*
€ 28.99*
€ 61.99*
-13%
€ 200.00
€ 174.99*
€ 18.99*
