1/4
TinkerForge 2105 Power/voltage/amp meter Suitable for (single board PCs) TinkerForge 1 pc(s)
EAN:
Part number:
Item no:
Number
Total (€ 40.33 / piece)
€ 40.33
plus VAT.
Only 10 Piece(s) available
Highlights & Details
TinkerForge Voltage/Current Bricklet 2.0
- Measures power, voltage and current up to 720W/36V/20A
- Resolution 1mW, 1mV, 1mA over complete measuring range
- BI-directional current measurement (e.g. charging/discharging)
- Configurable averaging and ADC conversion time
Technical specifications
- Dimensions (W x D x H): 30x30x18 mm
- Weight: 10 g
- Product type
Power/voltage/amp meter
- Suitable for
TinkerForge
- Content
1 pc(s)
Documents & Downloads
User & Safety Instructions
User & Safety Instructions 2255005 TinkerForge 2105 Power/voltage/amp meter Suitable for (single board PCs) TinkerForge 1 pc(s)
Description
With the Voltage/Current Bricklet 2.0, Bricks can be extended by the ability to measure power/voltage/current. The Bricklet is simply installed between power supply (e.g. battery) and load (e.g. motor).
In battery-operated systems, two-way current measurement can be used to determine the charge status of the battery.
The Bricklet has no galvanic separation to the Tinkerforge system. This means that there is a direct electrical connection between the terminals of the Bricklet and the rest of the system. If this leads to unwanted connections, ground loops or short-circuits in the respective application, the use together with an insulator Bricklet is advisable.
The Voltage/Current Bricklet 2.0 has a 7-pin Bricklet plug and is connected with a 7p-10p Bricklet cable with a brick.
This text is machine translated.
In battery-operated systems, two-way current measurement can be used to determine the charge status of the battery.
The Bricklet has no galvanic separation to the Tinkerforge system. This means that there is a direct electrical connection between the terminals of the Bricklet and the rest of the system. If this leads to unwanted connections, ground loops or short-circuits in the respective application, the use together with an insulator Bricklet is advisable.
The Voltage/Current Bricklet 2.0 has a 7-pin Bricklet plug and is connected with a 7p-10p Bricklet cable with a brick.
This text is machine translated.
Features
- Sensor: INA226 with 4mΩ shunt resistor
- Current consumption: 30mW (6mA at 5V)
- Maximum current: ±20A
- Maximum voltage: 36V