Name: WEICON 10054013 IDC tools Suitable for LSA PLUS, LSA PLUS terminals 0.35 up to 0.9 mm 0.7 up to 2.6 mm²
Brand: WEICON
SKU: 2268557
Availability: InStock

Highlights & Details

WEICON LSA sensor no. 40 blue/red

For soldering, screwing and stripping-free application and at the same time
Cutting cables to length on LSA strips

Technical specifications

Product type: IDC tools

Suitable for: LSA PLUS
LSA PLUS terminals

Operating range (diameter): 0.35 up to 0.9 mm

Working area diameter (min.): 0.35 mm

Operating range (diameter) (max.): 0.9 mm

Working area (cross section): 0.7 up to 2.6 mm²

Working area cross section (min.): 0.7 mm²

Operating range (cross section) (max.): 2.6 mm²

Length: 185 mm

Weight: 60 g

UKCA: not relevant

Documents & Downloads

Datasheet

Datasheet 2268557 WEICON 10054013 IDC tools Suitable for LSA PLUS, LSA PLUS terminals 0.35 up to 0.9 mm 0.7 up to 2.6 mm²

User & Safety Instructions

User & Safety Instructions 2268557 WEICON 10054013 IDC tools Suitable for LSA PLUS, LSA PLUS terminals 0.35 up to 0.9 mm 0.7 up to 2.6 mm²

Description

With the sensor No. 40 wires with a cable diameter of 0.35 - 0.9 mm and a wire diameter of 0.7 - 2.6 mm can be connected to LSA strips or blocks. By lightly pressing the tool, wires are contacted and cut off in just one operation. Manual stripping or screwing is not required. The built-in scissors can be switched off if required, for example if cutting a wire residue is not desired. A sensor ensures that the scissors are not activated until the wire has been pressed deep enough into the contact. The sensor can be deactivated (OFF) for double circuits of contacts. Furthermore, the LSA sensor No. 40 via a fold-out draw hook for removing wires from the LSA contact as well as via a fold-out release blade for releasing LSA modules from the mounting bracket. The tool
is designed for up to 200,000 circuits (with 0.4 mm wire diameter).

This text is machine translated.

Related products can be found here

Flat & Round Nose Pliers Cable Strippers Button Cells Allen Key Sets Solder Tips Crimpers Ferrules Connector Clips & Single Wire Connectors Screwdriver sets Assortment Cases & Boxes Side Cutters Bit sets Multimeters Soldering Wire Wire & Cable Cutters Voltage Testers Adhesive Tape

Description

With the sensor No. 40 wires with a cable diameter of 0.35 - 0.9 mm and a wire diameter of 0.7 - 2.6 mm can be connected to LSA strips or blocks. By lightly pressing the tool, wires are contacted and cut off in just one operation. Manual stripping or screwing is not required. The built-in scissors can be switched off if required, for example if cutting a wire residue is not desired. A sensor ensures that the scissors are not activated until the wire has been pressed deep enough into the contact. The sensor can be deactivated (OFF) for double circuits of contacts. Furthermore, the LSA sensor No. 40 via a fold-out draw hook for removing wires from the LSA contact as well as via a fold-out release blade for releasing LSA modules from the mounting bracket. The tool
is designed for up to 200,000 circuits (with 0.4 mm wire diameter).

This text is machine translated.