Image similar
Image similar
Keithley 6221/2182/A/E Bench multimeter
EAN:
Part number:
Item no:
Datasheet (PDF)
Number
Total (€ 18,041.18 / piece)
€ 18,041.18
plus VAT.
Highlights & Details
Model 6221/2182 A/E power source with nano-voltmeter
- Deployment and recording (programmable load) of 100 fA up to 100 mA
- Stable power provision for different loads thanks to 1014 Ω output impedance
- 65.000 points memory enables extensive testing of current sweeps directly from the power source
- Integrated interfaces: RS-232, GPIB, Trigger Link and digital I/O
- Rekonfigurierbarer Triax output simplifies the tuning of the safety requirements of the application
- No programming of existing applications thanks to model-220 emulation mode
- Implementation of low-noise measurements at high speeds
- Delta mode coordinated measurements with shift of power source
- Synchronization with power for 110 dB NMRR and minimum disruption by AC common mode currents
- Two channels for measurement of voltage, temperature or ratio of an unknown resistance.
Technical specifications
- Single-channel 11 W output power
- Output current 100 fA up to 100 mA
- Bandwidth 10kHz - 1MHz
- Output impedance 10^14 ohms (2 nA/ 20 nA range)
- Load regulation< 10 µA and 0.1V to 20V (0.1% + 20 mV)
- 20 V to 40 V (0.1% + 100 mV)
- Power control< 10µA
- Ripple< 5 mVp-p
- <1 MV RMS (10 Hz-20 MHz) at 50 Ohm load
- Product type
Bench multimeter
- A DC reading range (max.)
100 mA
- Height
89 mm
- Width
213 mm
- Weight
4.75 kg
Manufacturer's standards (no certificate)
- Current reading
AC/DC
- Type
6221/2182/A/E
- Dim
(W x H) 213 mm x 89 mm
- Output current 1
0A up to ± 100 mA A
- Type
Table device
11 W
- Connections
Banana jacks at front
- Inputs
IEC 320 C14
- Residual ripple
<5 mVp-p;< 1 MV RMS (10 Hz-20 MHz) at 50 Ohm load
- Mains control
<10 µA
- Input voltage
100 - 240 V AC
Documents & Downloads
Datasheet
Datasheet 1164921 Keithley 6221/2182/A/E Bench multimeter
Datasheet 1164921 Keithley 6221/2182/A/E Bench multimeter
User & Safety Instructions
User & Safety Instructions 1164921 Keithley 6221/2182/A/E Bench multimeter
Description
The combined model 6221 with 2182 A is the industry's most comprehensive solution for various conductivity measurements. This combined device is 10x faster and has a significantly lower noise than other device options. Data can be displayed in a single measurement, instead of having several results together integrated pret picking time consuming and erroneous afflicted. The model 6221/2182/A/E is easy to use because the combined devices 6221 and 2182 A as an instrument which can be considered. Its simple connections of power, eliminates the insulation and current signal-to-noise problems affecting the other solutions.
This text is machine translated.
This text is machine translated.
Scope of delivery
- Power cord
- User manual
- Data sheet
- Model 237-ALG-2 low-noise triax input cable 2 m long with 3 Slot Triax plug and 3 alligator clips
- Model 8501-2 Trigger Link cable 2 m long DIN to DIN
- CA -180-3 A TSP link cable
- Module 6221/2182 A/E