Image similar
Transfer module Phoenix Contact 1029566 UM- D37SUB/M/HC3/AIO/SP-MT Content: 1 pc(s)
Product type
Transfer module
Total no. of pins
37
Connection
D-Sub pin strip
Push-in spring-loaded terminal
Mounting type
Carry rail mounting
AWG
24 - 16
Datasheet (PDF)
EAN:
Part number:
Item no:
Technical specifications
- Number of pins: 34
- Push-in spring-loaded connection type
- Screw thread UNC 4-40
- Conductor cross-section flexible: 0.2 mm² ... 1.5 mm²;0.25 mm² ... 1.5 mm² (wire-end sleeve without plastic sleeve);0.25 mm² ... 1.5 mm² (wire-end sleeve with plastic sleeve)
- Conductor cross-section rigid: 0.2 mm² ... 1.5 mm².
- Wire cross-section AWG: 24 ... 16
- Width: 168.3 mm
- Height: 89.6 mm
- Depth: 65.59 mm
- Ambient conditions: Environmental conditions
- Ambient temperature (operation): -20 °C ... 50 °C
- Ambient temperature (storage/transport): -20 °C ... 70 °C
- Altitude: ≤ 2000 m.
- Standards/regulations: EN IEC 60664-1
- Mounting type: Rail mounting
- Overvoltage category II
- Pollution level: 2
- Stripped length: 10 mm
- Air and creepage distances: Air and creepage distances
- All mounting positions permitted
- Note on operation: For the intended use, the requirements of the installation guideline (see downloads) must be observed. In the case of applications or use with third-party products, the requirements, safety and warning notices of the respective third-party manufacturer must also be met.
- Contact spacing: 5.08 mm
- Connection according to IEC 60807-2 standard
- Certificate: UKCA-compliant
- Article dimensions: Article dimensions
- Insulation: Functional insulation
- UKCA
- Rated insulation voltage 50 V
- Rated surge voltage 0.5 kV (1.2 / 50 μs)
- Protection type (installation location) ≥ IP54
- Status display available: No.
- Number of connections: 1
- Insulation properties: Air and creepage distances: Insulation properties: Air- and creepage distances
- Mating cycles: 500
- Matching I/O-card: TDIL01 (non-redundant);TDIL11 (redundant);TDOB01 (non-redundant);TDOB11 (redundant);TAIX01 (non-redundant);TAIX11 (redundant);TAOX01 (non-redundant);TAOX11 (redundant)
- OPERATING VOLTAGE (DC): ≤ 30 V DC
- Current (each branch): ≤ 0.1 A.
- Connection 1 (control level): Connection 1 (control level)
- Connection 2 (field level): Connector 2 (field level)
- Protection class (module): IP00
- Supported controls: HONEYWELL Experion PKS C300/C-series: Supported controller: HONEYWELL Experion PKS C300/C-series
- Product type
Transfer module
- Total no. of pins
37
- Connection
D-Sub pin strip
Push-in spring-loaded terminal
- Mounting type
Carry rail mounting
24 - 16
- Dim
(L x W x H) 65.59 x 168.3 x 89.6 mm
- Content
1 pc(s)
- Number of pins
37
- Width
168.3 mm
- Height
89.6 mm
- Length
65.59 mm
- Cross section (flexible) (max.)
1.5 mm²
- Cross section (inflexible) (max.)
1.5 mm²
- Cross section (flexible) (min.)
0.2 mm²
- Cross section (inflexible) (min.)
0.2 mm²
- Depth
65.59 mm
- Test current
0.1 A
- Rated voltage
30 V
- UKCA
yes
Documents & Downloads
Datasheet
Datasheet 3561950 Transfer module Phoenix Contact 1029566 UM- D37SUB/M/HC3/AIO/SP-MT Content: 1 pc(s)
User & Safety Instructions
User & Safety Instructions 3561950 Transfer module Phoenix Contact 1029566 UM- D37SUB/M/HC3/AIO/SP-MT Content: 1 pc(s)
Description
Transfer module, control: Honeywell C300 I/O, connection 1: D-SUB header 1x 37-pin, connection 2: Push-in spring connection 1x 34-pin, control logic: Positive switching
This text is machine translated.
This text is machine translated.