Image similar
Image similar
Appoldt AWG-0-10V Encoder module 1 pc(s)
EAN:
Part number:
Item no:
Product type
Encoder module
Type
AWG-0-10V
Connection
Screw terminal
Max. temperature
+55 °C
Min. temperature
-10 °C
Datasheet (PDF)
Number
Total (€ 37.81 / piece)
€ 52.09
-27 %
€ 37.81
plus VAT.
Highlights & Details
Analogue value control element
- Analogue output with manual/auto switching and feedback
- This text is machine translated.
Technical specifications
- Design: with toggle switch (2-pin) and feedback
- Input voltage: 24 V/DC, 24 V/AC
- Input/Output Signal: 0 - 10 V/DC
- Product type
Encoder module
- Type
AWG-0-10V
- Connection
Screw terminal
- Max. temperature
+55 °C
- Min. temperature
-10 °C
- Depth
62 mm
- Width
17 mm
- Height
62 mm
- Dim
(W x H x D) 17 x 62 x 62 mm
- Content
1 pc(s)
Documents & Downloads
Datasheet
Datasheet 507917 Appoldt AWG-0-10V Encoder module 1 pc(s)
User & Safety Instructions
User & Safety Instructions 507917 Appoldt AWG-0-10V Encoder module 1 pc(s)
Description
This setpoint generator controls output of an analog signal in case of an emergency from 0 - 10 V, among other things, valves, mixing flaps or temperature values. Via a 2-stage switch is used to switch the module in 2 modes of operation (manual/auto). Position of the potential-free contact S1/S2 has recovered to a statement, if the module is in the hand or AUTO mode. Apply the Analogue value generator, among others, in building automation.
Switch position "Manual": The setpoint is set by the potentiometer on the front. The signal is between the terminals Y and A2.
Switch position "AUTO": The setpoint is without changing over the terminal Y to d terminals YR-linked.
This text is machine translated.
Switch position "Manual": The setpoint is set by the potentiometer on the front. The signal is between the terminals Y and A2.
Switch position "AUTO": The setpoint is without changing over the terminal Y to d terminals YR-linked.
This text is machine translated.