Image similar
Phoenix Contact 1033786 VAL-SEC-T2-2+F-48DC-FM Surge arrester Surge protection for: PV systems 1 pc(s)
Datasheet (PDF)
EAN:
Part number:
Item no:
Technical specifications
- Family: SEC Family
- IEC TEST CLASS II;T2
- Model: Two-part rail module can be plugged
- Number of poles: 2
- Message Surge protection defective: Optical, telecommunication contact
- RATED VOLTAGE UN: 60 V AC (TN/TT);40 V DC ... 60 V DC
- Display / distance message: Display / remote message
- Switching function: Changer
- Connection type: Plug/screw connection via COMBICON
- Screw thread M2
- Tightening torque 0.25 Nm
- Conductor cross-section flexible: 0.14 mm² ... 1.5 mm².
- Conductor cross-section rigid: 0.14 mm² ... 1.5 mm².
- Wire cross-section AWG: 28 ... 16
- Width: 37.3 mm
- Height: 97.9 mm
- Depth: 74.5 mm (including mounting rail 7.5 mm)
- Division unit 2 TE
- Flammability class according to UL 94 V-0
- Material housing: PA 6.6-FR 20 % GF;PBT-FR
- DIRECTION OF ACTION (DC+/DC-) - PE
- Maximum continuous voltage UC: 75 V DC;75 V AC
- Earth conductor current IPE: ≤ 5 µA DC;≤ 5 µA AC
- Nominal impulse surge current In (8/20) µs: 20 kA
- Total leakage surge current ITtotal (8/20) µs 40 kA
- Ambient conditions: Environmental conditions
- Protection class: IP20
- Ambient temperature (operation): -40 °C ... 80 °C
- Ambient temperature (storage/transport): -40 °C ... 80 °C
- Altitude: ≤ 6000 m (amsl)
- Standards/regulations EN 61643-11
- Note: 2012
- Mounting type: Rail: 35 mm
- EN type T2
- Power supply system IEC DC
- Insulation properties: Insulation properties
- Over voltage category III
- Pollution level: 2
- Nominal frequency FN 50 Hz (60 Hz)
- CTI value of material: 600
- INSULATION MATERIAL PA6.6-FR 20% GF;PBT-FR
- Material group: I
- PROTECTION PATHS (DC+) - (DC-);(DC+) - PE;(DC-) - PE
- Maximum Surge current Imax (8/20) µs 40 kA
- Impulse contact voltage at 6 kV (1.2/50) µs: ≤ 1 kV
- TOV behavior at UT: 174 V DC (5 s / resistance mode);130 V AC (120 min / resistance mode)
- Permissible air humidity (operation): 5 % ... 95 %.
- Shock (operation): 30g (half-sine / 11 ms / 3x ±X, ±Y, ±Z)
- Vibration (operation): 5g (10 ... 500 Hz / 2.5 h / X, Y, Z)
- Naming of connection: Remote fault signaling contact
- Operating voltage: 5 V AC ... 250 V AC (altitude ≤ 2000 m (amsl));5 V AC ... 150 V AC (altitude > 2000 m (amsl));125 V DC (200 mA DC)
- Operating current: 5 mA AC ... 1 A AC;1 A DC (30 V DC)
- Stripped length: 7 mm
- Remote defect signaling contact: Defect signaling contact
- Rated current IL: 40 A (Bi-connect M4 fork cable lug 6 mm²);63 A (TWIN cable end sleeve 2x 10 mm²)
- Short circuit protection ISCCR: 0.2 kA DC (without backup);6 kA DC (with backup fuse 20 A gG / B) ;10 kA AC (circuit breaker C63 A);25 kA AC (with backup fuse up to 315 A gG);50 kA AC (with backup fuse up to 200 A gG)
- Maximum fusing for V-passage wiring: 20 A DC (gG/B for ISCCR > 200 A)
- Maximum fusing for stub cable wiring: 20 A DC (gG/B for ISCCR > 200 A);315 A AC (gG)
- Additional technical data: Additional technical data
- EN 61643-11, EN 61643-11
- Colour (plug): Light gray (RAL 7035)
- Colour (base element): Grey (RAL 7042)
- Protection level Up (DC+) - (DC-): ≤ 0.9 kV
- Protection level Up (DC+/DC-) - PE: ≤ 1 kV
- Highest continuous voltage UCPV 75 V DC
- Short-circuit resistance ISCPV 1000 A.
- Continuous operating current ICPV 10 µA
- Response time TA (DC+) - (DC-): ≤ 25 ns
- Response time TA (DC+/DC-) - PE: ≤ 100 ns
- Product type
Surge arrester
- Surge protection for
PV systems
- Type
Mounting rail module can be plugged in two parts
IP20
- Manufacturer part #
1033786
- Type
2
- Dim
(W x H x D) 37.3 x 97.9 x 74.5 mm
- Width
37.3 mm
- Height
97.9 mm
- Depth
74.5 mm
- Content
1 pc(s)
- UKCA
yes
Documents & Downloads
Datasheet
Datasheet 3562106 Phoenix Contact 1033786 VAL-SEC-T2-2+F-48DC-FM Surge arrester Surge protection for: PV systems 1 pc(s)
User & Safety Instructions
User & Safety Instructions 3562106 Phoenix Contact 1033786 VAL-SEC-T2-2+F-48DC-FM Surge arrester Surge protection for: PV systems 1 pc(s)
Description
Leakage current-free pluggable surge arrestors for 2 pin insulated and earthed DC voltage systems with linear operating characteristic to 48 V DC, for mounting rails, 3 pin base element with telecommunication contact, three plug-in temperature monitored protection elements, status message on each plug.
This text is machine translated.
This text is machine translated.