Name: Phoenix Contact 1180148 VAL-EV-T1/T2 264/12.5-P Surge protection plug 12.5 kA 1 pc(s)
Brand: Phoenix Contact
SKU: 3565655

'Phoenix Contact' battery charger with label showing electrical specifications, CE marking, and origin from Germany.

Image similar

Datasheet (PDF)

EAN:

Part number:

Item no:

Unavailable

Sales and shipping:

Conrad ElectronicTerms & Conditions

Report legal concerns

Technical specifications

Product family: VALVETRAB MS
IEC TEST CLASS I / II;T1 / T2
Model: Two-part rail module can be plugged
Message Surge Protection Faulty: Optical
NOMINAL VOLTAGE UN:240/415 V AC (TN-C, TN-S);240/415 V AC (TT)
Connection type: Pluggable
Width 17.5 mm
Height: 47.2 mm
Depth: 63.9 mm
Division unit 1 TE
Colour: Light gray (RAL 7035)
Flammability class according to UL 94 V-0
Material housing PA 6.6;PBT
DIRECTION OF ACTION L-N / L-PEN
Highest continuous voltage UC 264 V AC
Earth current IPE ≤ 800 µA
Nominal impulse surge current In (8/20) µs: 12.5 kA
Response time TA ≤ 25 ns
Ambient conditions: Environmental conditions
Protection class: IP20
Ambient temperature (operation): -40 °C ... 80 °C
Ambient temperature (storage/transport): -40 °C ... 80 °C
Altitude: ≤ 2000 m (amsl)
Standards/regulations EN 61643-11
Note: 2012
Mounting type: On base element
EN TYPE T1/T2
POWER SUPPLY SYSTEM IEC: TN-S;TN-C;TT
Insulation properties: Insulation properties
Over voltage category III
Pollution level: 2
Nominal frequency FN 50 Hz (60 Hz)
CTI value of material: 600
PA 6.6/PBT insulation
Material group: I
Protective paths L-N
Standby power consumption PC: ≤ 270 MVA
Maximum Surge current Imax (8/20) µs 50 kA
Flash test current (10/350) µs, charge 6.25 A
Flash test current (10/350) µs, specific energy: 39 kJ/Ω
Lightning test current (10/350) µs, peak current IIMP: 12.5 kA
Protection level Up: ≤ 1.2 kV;≤ 1.6 kV (30 kA - 8/20 µs)
Residual voltage Ures: ≤ 1.2 kV (in);≤ 1.1 kV (at 10 kA);≤ 1 kV (at 5 kA);≤ 0.9 kV (at 3 kA)
TOV behavior at UT: 415 V AC (5 s / resistance mode);457 V AC (120 min / safe failure mode)
Permissible air humidity (operation): 5 % ... 95 %.
Shock (operation): 30g (half-sine / 11 ms / 3x ±X, ±Y, ±Z)
Vibration (operation): 7.5g (10 ... 500 Hz / 2.5 h / X, Y, Z)
Short-circuit resistance ISCCR 25 kA
Maximum fusing for stub cable wiring: 160 A (gG)