• All things technology
  • Delivery within Europe
  • Right to Cancel applies
  • Specialist retailer since 1923

Crossbar switch PSR-PE60-3NO-24DC-SC-SET60 Phoenix Contact Operating voltage: 24 V DC 1 maker (W x H x D) 12.5 x 99 x 11

Image similar
Packaging type
Single
Product type
Crossbar switch
Connector
Screw-fit
Operating voltage
24 V DC
Type
PSR-PE60-3NO-24DC-SC-SET60
Datasheet (PDF)
EAN:
Part number:
Item no:
Unavailable

Sales and shipping:
Conrad ElectronicTerms & Conditions

Technical specifications

  • Product family: PSRclassic
  • Connection type: screw terminals.
  • M3 screw thread
  • Tightening torque: 0.5 Nm ... 0.6 Nm
  • Conductor cross-section flexible: 0.2 mm² ... 2.5 mm².
  • Conductor cross-section rigid: 0.2 mm² ... 2.5 mm².
  • Wire cross-section AWG: 24 ... 12
  • Width 12.5 mm
  • Height: 99 mm
  • Depth: 114.5 mm
  • Material: housing: PA
  • Ambient conditions: Environmental conditions
  • Protection class: IP20
  • Ambient temperature (operation): -40 °C ... 70 °C (observe De-rating)
  • Ambient temperature (storage/transport): -40 °C ... 85 °C
  • Mounting type: Rail mounting
  • Insulation properties: Insulation properties
  • Over voltage category III
  • Pollution level: 2
  • Vibration (operation): 10 Hz ... 150 Hz, 2g
  • Stripped length: 7 mm
  • Mounting position: Vertical or horizontal
  • Maximum power loss at rated conditions: UB = 26.4 V   , US = 24 V, IS = 31 mA, IL2 = 48 A, Rcontact = 0.025 Ω
  • CE CE
  • Connection technology: Connection technology
  • Note for application: Only for industrial use
  • Wire connection: Conductor connection
  • Switching frequency: Max. 0.1 Hz
  • Mounting instructions: See derating curve
  • Operating height: ≤ 2000 m (over NN)
  • Max. ass. Humidity (operating): 75% (average, 85% occasional, no condensation)
  • Shock 15g
  • Protection: Serial reverse polarity protection | Suppressor diode, 38.6 V / 600 W.
  • Status display 1 x LED (green)
  • Switching voltage: Min. 12 V DC; max. 250 V (AC/DC)
  • Naming: 3/4
  • Application: Safe Power Off;Safe Power On;High Demand;Low Demand
  • Supply: Supply
  • Colour (housing): Grey (RAL 7042)
  • Min. Switch-on current 10 mA; max. 4 A
  • Description of the output: 1 NO, undelayed, floating
  • Contact version: 3 release current paths
  • Continuous current 4 A
  • Rated insulation voltage 250 V AC
  • RATED CONTROL CIRCUIT SUPPLY VOLTAGE US: 24 VDC -10 % ... +10 % ("1" signal)
  • Rated control feed current IS: Typ. 31 mA
  • Safety specifications: Safety specifications
  • Mechanical life: 10x 106 switching cycles
  • Typical fall-back time: < 50 ms (when requested via control input 3)
  • Contact material AgSnO2, +AU
  • SWITCHING CAPACITY 1.2 A (24 V DC 13);1.6 A (230 V AC 15)
  • Output protection: 4 A GL/gG (Safe-State-OFF application)
  • Relay type: Electromechanical relay according to IEC/EN 61810
  • Times: Times
  • Type. US reaction time: < 70 ms (when controlled by control input 3)
  • Readiness time 500 ms
  • Rating type 100 % ED
  • Rated surge voltage / insulation: Safe separation, reinforced insulation 6.4 kV between 250 V load current paths and 24 V logic paths; basic insulation 4 kV between all current paths and housing
  • Filter time 1 ms (in case of voltage dips in US)
  • Number of outputs: 3 (not safety-related)
  • Switching capacity: Min. 120 mW
  • Quadr. Total current: 48 A2 (observe derating)
  • Safety Integrity Level (SIL) 3
  • Protection class Installation location minimum: IP54
  • Max. ass. Humidity (storage/transport): 75% (average, 85% occasional, no condensation)
  • plug connection: yes
  • 1-channel control
  • Power consumption in US: Typical 745 mW
  • Stop category: 0
  • Relay: Enable current paths (1/2, 5/6, 7/8): Relay: Enable current paths (1/2, 5/6, 7/8)
  • Technical data: EN 50156: Technical data: EN 50156
  • Security specifications: IEC 61508 - High-Demand / Safe-State-OFF: Technical data: IEC 61508 - High-Demand / Safe-State-OFF
  • Security specifications: IEC 61508 - Low-Demand / Safe-State-OFF: Technical data: IEC 61508 - Low-Demand / Safe-State-OFF
  • Security specifications: IEC 61508 - Low-demand / Safe-State-ON: Technical data: IEC 61508 - Low-demand / Safe-State-ON
Packaging type

Single

Product type

Crossbar switch

Type

PSR-PE60-3NO-24DC-SC-SET60

Connector

Screw-fit

Operating voltage

24 V DC

Response time

70 ms

Contact type

1 maker

Switching voltage (max.)

250 V DC/AC

Safety integrity level

SIL 3

Certification (sensors)

CE

IP20

Operating temperature (min.)

-40 °C

Operating temperature (max.)

70 °C

Depth

114.5 mm

Width

12.5 mm

Height

99 mm

Dim

(W x H x D) 12.5 x 99 x 114.5 mm

Content

1 pc(s)

UKCA

yes

Documents & Downloads

Datasheet

Datasheet 3569002 Crossbar switch PSR-PE60-3NO-24DC-SC-SET60 Phoenix Contact Operating voltage: 24 V DC 1 maker (W x H x D) 12.5 x 99 x 11

User & Safety Instructions

User & Safety Instructions 3569002 Crossbar switch PSR-PE60-3NO-24DC-SC-SET60 Phoenix Contact Operating voltage: 24 V DC 1 maker (W x H x D) 12.5 x 99 x 11

Description

Set of 60 coupling relays for SIL 3 high-value and low-demand applications, connects digital output signals to the periphery, 3 release current paths, Safe-state-OFF and Safe-State-ON-applications, test pulse filter, plug-in screw terminal

This text is machine translated.