1/7
Bosch Accessories 2608577347 2608577347 HSS Metal twist drill bit set 7-piece 2 mm, 3 mm, 4 mm, 5 mm, 6 mm, 7 mm, 8 mm,
EAN:
Part number:
Item no:
Product type
Metal twist drill bit set
Drill hole Ø
2 mm
3 mm
4 mm
5 mm
6 mm
7 mm
8 mm
9 mm
10 mm
Content
1 Set
Material
HSS
Material suitability
Metal
Quantity (Set(s))
Savings
Package size (plus VAT.)
1
-
€ 8.39
3
6% = € 0.47
€ 7.92
Volume discounts vary depending on the seller
You save € 0.00
Number
Total (€ 8.39 / piece)
€ 8.39
plus VAT.
Metal twist drill HSS set PointTeQ, DIN 338, 7-piece Mini X-Line set
Technical specifications
- Product type
Metal twist drill bit set
- Drill hole Ø
2 mm
3 mm
4 mm
5 mm
6 mm
7 mm
8 mm
9 mm
10 mm
- Content
1 Set
- Material
HSS
- Material suitability
Metal
- Working length
24 mm
33 mm
43 mm
52 mm
57 mm
75 mm
87 mm
Documents & Downloads
User & Safety Instructions
User & Safety Instructions 2208384 Bosch Accessories 2608577347 2608577347 HSS Metal twist drill bit set 7-piece 2 mm, 3 mm, 4 mm, 5 mm, 6 mm, 7 mm, 8 mm,
Description
The HSS twist drill PointTeQ enables quick drilling into metal due to the PointTeQ design at the drill tip. Quick and easy drilling is possible because the self-centering tip prevents hiking. Due to the increased drilling rate, less heat and wear are generated. The PointTeQ design on the drill tip remains sharp and stands up for continuous use. This drill is for drilling through and centering holes in alloyed and unalloyed steel, in non-ferrous metals, cast steel, cast iron and plastic. The shaft is cylindrical (the shaft diameter corresponds to the drill diameter). It is used with drill stands and drill screwdrivers. There is a low risk of breakage, especially for drills with a diameter less than 6 mm, since the drill has been manufactured to have a highly elastic body. The groove coated with black oxide enables a quick removal of the chips. The HSS twist drill PointTeQ is manufactured according to DIN 338. The drill is type N (small side chip angle) with a tip angle of 135 degrees. Diameter mm: 2.0; 3.0; 4.0; 5.0; 6.0; 8.0; 10.0, working length mm: 24; 33; 43; 52; 57; 75; 87
This text is machine translated.
This text is machine translated.
Features
- The HSS twist drill PointTeQ enables quick drilling into metal due to the PointTeQ design at the drill tip. Quick and easy
- Drilling is possible because the self-centering tip prevents hiking. Due to the increased drilling rate, heat and wear are reduced. The PointTeQ design on the drill tip remains sharp and stands up for continuous use.
- This drill is suitable for drilling through and centering holes in alloyed and unalloyed steel, in non-ferrous metals, cast steel, cast iron and plastic. There is a low risk of breakage, especially for drills with a diameter less than 6 mm, as the drill has been manufactured to fit
- Has a highly elastic body. The groove coated with black oxide enables a quick removal of the chips. The HSS twist drill bit
- PointTeQ is manufactured according to DIN 338. The drill is type N (small side chip angle) with a tip angle of 135 degrees. The set Mini-X-Line presents itself in a practical box with a clear product arrangement. The shaft is cylindrical. (The shaft is the same as the diameter of the drill.) He is
- Designed for floor-standing drills and drill screwdrivers.
Scope of delivery
- Diameter mm: 2.0 · 3.0 · 4.0 · 5.0 · 6.0 · 8.0 · 10.0
- Working length mm: 24 · 33 · 43 · 52 · 57 · 75 · 87