Buy FLIR MR277 Moisture meter Built-in IR camera, Temperature reading, Non-contact IR sensor

A hand is holding a smartphone displaying thermal images. Next to it, a portable thermal imaging device lies on a table.

Thermal image shows temperature differences: Blue is colder, orange is warmer. Top right display shows 22.9°C, bottom 20.6°C.

A man is using an infrared thermometer to measure the temperature of a wooden wall section next to a window.

Thermal image shows hand with camera. Temperature scaled from 20.4 to 29.1 degrees Celsius. Battery indicator displayed in the top left corner.

A person is showing a measuring device with a glowing light to the camera. The device has warning labels and is being used in a room.

A person is holding a handheld device and a smartphone. The handheld device displays CO2 levels and temperature, while the smartphone shows similar measurement data.

A portable FLIR measuring device with a screen, surrounded by detachable sensors and a USB charging cable. Primarily used for gas detection.

A multimeter with several buttons and a display, used for checking current strengths and other electrical measurements.

'Flir MR277' rear view of a handheld measuring device with an infrared sensor and multiple control buttons. Suitable for moisture and leak detection.

Black technical handheld device with display and ports on top, likely a measuring instrument for specific technical applications.

A measuring device shows: relative humidity 41.5%, temperature 23.7 °C, dew point 9.9 °C, mixing ratio 7.55 g/kg, vapour pressure 1.22 kPa.

A person is holding a thermal imaging camera displaying a colourful temperature reading. The camera is pointed upwards.

A person is using a thermal imaging camera in a corridor to measure temperature differences on a door. The screen displays colourful thermal images.

1/14

Datasheet (PDF)

Fast track dispatch on Fri, 18 Sep

3 Piece(s)

Sales and shipping:

Conrad Electronic Terms & Conditions

Number

Piece(s)

Total (€ 1,626.05 / piece)

€ 1,626.05

plus VAT.

Only 3 Piece(s) available

Report legal concerns

FLIR MR277 building suspension system

Highlights & Details

Measurement type (details) Non-invasive
Suitable for Building materials, Wood

Technical specifications

Air temperature: Measurement range 0 °C to 50 °C/basic accuracy ±0.6 °C.
Detection limit: 49 cm2 (wet zone detection at 10 m)
Dew point: Measurement range -30 °C to 50 °C / basic accuracy ±1.0 °C.
Non-invasive measuring depth: Max. 19 mm
Digital camera: 2 MP, 70.5° × 56° FOV
Image modes: IR, visible light, MSX®
Image refresh rate 9 Hz
Field of view [W × H]: 55° × 43°
Thermal imaging resolution [W × H]: 19200 pixels (160 × 120)

Product type: Moisture meter

Measurement type (details): Non-invasive

: Manufacturer's standards (no certificate)

Suitable for: Building materials
Wood

Interfaces: USB

Power supply (details): Accumulator

Display (details): QVGA (320 × 240 pixels) 2.8 inch color TFT graphic display

Features: Built-in IR camera
Temperature reading
Non-contact IR sensor

Documents & Downloads

Datasheet

Datasheet 2238083 FLIR MR277 Moisture meter Built-in IR camera, Temperature reading, Non-contact IR sensor

User & Safety Instructions

User & Safety Instructions 2238083 FLIR MR277 Moisture meter Built-in IR camera, Temperature reading, Non-contact IR sensor

Information

Information 2238083 FLIR MR277 Moisture meter Built-in IR camera, Temperature reading, Non-contact IR sensor

Description

The MR277 is the first building inspection system from FLIR to combine the benefits of Infrared Guided Measurement (IGM) and our patented Multispectral Dynamic Imaging (MSX) with advanced environmental sensors to help you quickly locate, clearly identify and document problems. The IGM measurement aid technology and a laser pointer isolate the area where you can use the integrated non-invasive humidity sensor or the external invasive pen probe. With automatically calculated environmental values and a field-replaceable humidity/temperature sensor, the MR277 allows you to get ready to work quickly, minimizing downtime. Connect to external devices via MeterLink® and use FLIR Tools® to improve troubleshooting and reporting.

This text is machine translated.

Features

Integrated non-invasive sensor
external pen probe

Scope of delivery

MR277
MR13 changeable temperature and relative humidity sensor
MR02 external standard pin sensor
Quick guide
International USB charger
USB cable
Carry strap