Megger LT300-EN-00 Electrical tester
EAN:
Part number:
Item no:
Datasheet (PDF)
Number
Total (€ 735.29 / piece)
€ 735.29
plus VAT.
Only 1 Piece(s) available
Highlights & Details
Megger LT 300 Loop Impedance Tester
- Loop measurement with a high test current
- Loop impedance test without FI/RCD
- Voltage range 50 V to 450 V
- Frequency range 16 Hz to 400 Hz.
- Robust casing with protective rubber cover IP54
- Measurement category CAT IV 300 V
Technical specifications
- Loop measurement with a high test current of 3A (at 50 V) up to 27A (at 550 V)
- Further frequency and voltage range of 50-550 V or 16-400 Hz
- Product type
Electrical tester
Manufacturer's standards (no certificate)
- Reading category
CAT IV 300 V
- Dim
(L x W x H) 148 x 203 x 78 mm
- Weight
980 g
IP54
- Reading range (VDE)
Loop impedance
Voltage
Current
- Width
203 mm
- Height
78 mm
- Length
148 mm
- Type
LT300-EN-00
- Power supply (details)
Batteries 8 x 1.5 V IEC LR6 (AA)
Documents & Downloads
Datasheet
Datasheet 1234447 Megger LT300-EN-00 Electrical tester
User & Safety Instructions
User & Safety Instructions 1234447 Megger LT300-EN-00 Electrical tester
Description
The LT300 is for high-current loop test for a wide range of frequencies and supply voltages with fast two-wire mode. It has a large, clear display, which is easy to read even under poor lighting conditions.
The high-current loop test offers fast, accurate and stable results at a resolution of 0.01 W up to 20 ohms.
The device is located in a rubber reinforced housing, with a built-in cover, to preserve the display, if the device is not in operation. The IP54 protection class for weather resistance offers excellent resistance under unfavorable conditions.
This text is machine translated.
The high-current loop test offers fast, accurate and stable results at a resolution of 0.01 W up to 20 ohms.
The device is located in a rubber reinforced housing, with a built-in cover, to preserve the display, if the device is not in operation. The IP54 protection class for weather resistance offers excellent resistance under unfavorable conditions.
This text is machine translated.
Features
- High-current loop test device
- Single-phase and three phase test
- 16 Hz to 400 Hz
- Corresponds to the requirements of CAT IV 300 V
- 2-conductor cable set or power adapter cable
- Robust reinforced housing
- Built-in cover