Buy Schabus 300241 SHT 241 Water leak detector mains-powered

A grey water leak detector with cable and sensor, H2O model, for wall mounting, designed to detect water leaks in buildings.

A water leak detector with plug, cable, and sensor for detecting water leakage in household appliances or rooms.

Diagram of a house with a flood protection system; shows float switches in the basement and ground floor, protecting against flooding.

1/3

Datasheet (PDF)

Fast track dispatch on Fri, 11 Sep

8 Piece(s)

Sales and shipping:

Conrad Electronic Terms & Conditions

Number

Piece(s)

Total (€ 70.58 / piece)

€ 70.58

plus VAT.

Only 8 Piece(s) available

Report legal concerns

Highlights & Details

Water detector SHT 241

Simple installation (230 V socket output)
Audible and visual alarm message
Also for other liquids (e.g. fuel oil, diesel, vegetable oil, lubricating oils, etc.)

Technical specifications

Product type: Water leak detector

Mounting type: Wall

Operating voltage: 230 V

Power supply (LOV): mains-powered

Sound pressure: 90 dB

Width: 60 mm

Height: 118 mm

Depth: 44 mm

Dim: (W x H x D) 60 x 118 x 44 mm

Function: Water leak detector

UKCA: yes

Documents & Downloads

Datasheet

Datasheet 1405637 Schabus 300241 SHT 241 Water leak detector mains-powered

User & Safety Instructions

User & Safety Instructions 1405637 Schabus 300241 SHT 241 Water leak detector mains-powered

Description

The water detector SHT 241 is a quick-less socket device for monitoring basements, laundry rooms, Heating rooms, tanks, and much more. The float switch is attached with a mounting bracket (optional) and the device is plugged into the socket. A signal transmitter is installed for a loud alarm signal.

The robust float switch is particularly suitable for dirty water or other liquids (e.g. fuel oil, diesel, vegetable oil, lubricating oil, etc.).

The switching contact of the float closes from approx. 4 cm level high and activates the input of the water sensor. By turning the float body, one gets the reverse switching function.

Extension sensor cable:
If required, you can change the sensor cable up to 50 m with a cable (2 x 0.5 mm²) extend. You must re-connect the existing sensor cable cut and terminals.

This text is machine translated.