1/4
Sol Expert 39887 Gearmotor G 100M incl. threaded rod 1:100 15 - 250 U/min
EAN:
Part number:
Item no:
Datasheet (PDF)
Quantity (Piece(s))
Savings
Package size (plus VAT.)
1
-
€ 14.28
3
5% = € 0.71
€ 13.57
5
7% = € 0.99
€ 13.29
Volume discounts vary depending on the seller
You save € 0.00
Number
Total (€ 14.28 / piece)
€ 14.28
plus VAT.
Highlights & Details
G100M gearbox
- Model Car Tuning
Technical specifications
- Threaded rod m2 x 30 mm
- Translation: 1:100
- IMAX (standstill): 700 mA@4.5V
- Speed 15 rpm@0.4V - 250 rpm/min@4.5V
- Connection: Solder lugs
- Gears: Metal
- Mounting possible with 2x M 1.6 on the front side
- Size
Universal
- Type
G 100M
- Axle length
30 mm
- Features
incl. threaded rod
- Gear reduction
1:100
- Axle Ø
2 mm
- Material
Metal
- Rotational speed (min.)
15 U/min
- Rotational speed (max.)
250 U/min
- Rotational speed range
15 - 250 U/min
- Voltage (min.)
0.4 V
- Voltage (max.)
4.5 V
- Length
55 mm
- Width
10 mm
- Height
8 mm
- Dim
(L x W x H) 55 x 10 x 8 mm
- Age category
15 years and over
- Product type
Gearmotor
Documents & Downloads
Datasheet
Datasheet 2471396 Sol Expert 39887 Gearmotor G 100M incl. threaded rod 1:100 15 - 250 U/min
User & Safety Instructions
User & Safety Instructions 2471396 Sol Expert 39887 Gearmotor G 100M incl. threaded rod 1:100 15 - 250 U/min
Description
Micro gear G100M / 4.5V with M2 threaded rod, ratio 1:100
Linear movements are often required, especially for special functions. Whether it is a hydraulic cylinder for excavators, tippers or cranes, a locking mechanism for doors, gates and flaps or a stamp for crane supports, lift axles and lifting devices.
The application possibilities are so versatile that we can offer two different ratios. In this way, the correct drive can be selected in force and speed as required. Our ER100 drive controller is recommended as a controller.
The 30 mm long threaded rod can be shortened as required and due to the small dimensions the motor finds
Almost everywhere still a place. The metal gears used in the gearbox guarantee a long service life and smooth running.
This text is machine translated.
Linear movements are often required, especially for special functions. Whether it is a hydraulic cylinder for excavators, tippers or cranes, a locking mechanism for doors, gates and flaps or a stamp for crane supports, lift axles and lifting devices.
The application possibilities are so versatile that we can offer two different ratios. In this way, the correct drive can be selected in force and speed as required. Our ER100 drive controller is recommended as a controller.
The 30 mm long threaded rod can be shortened as required and due to the small dimensions the motor finds
Almost everywhere still a place. The metal gears used in the gearbox guarantee a long service life and smooth running.
This text is machine translated.