1/2
SVS Nachrichtentechnik CX-12 R Receiver module Max. range (open field): 1000 m 2 V DC, 3.6 V DC
EAN:
Part number:
Item no:
Quantity (Piece(s))
Savings
Package size (plus VAT.)
1
-
€ 29.40
3
4% = € 1.27
€ 28.13
Volume discounts vary depending on the seller
You save € 0.00
Number
Total (€ 29.40 / piece)
€ 30.24
€ 29.40
plus VAT.
Highlights & Details
Multifunctional-receiver- and evaluation module 434 MHz CX-12 R
- Range width 1000 m
- 2 adjustable frequencies
- supply status and RSSI Sender can be transmitted
Technical specifications
- Learning capacity: Upto 60 Sender codes.
- Product type
Receiver module
- Type
CX-12 R
- Operating voltage
2 V DC
3.6 V DC
- Dim
(L x W x H) 31.4 x 15.2 x 3 mm
- Height
3 mm
- Length
31.4 mm
- Width
15.2 mm
- Version
Component
1000 m
- Transmission frequency
433,62 und 434,22 MHz
- Current consumption
Operation time ca. 19 mA
- Operating voltage
2 - 3.6 V DC
Documents & Downloads
User & Safety Instructions
User & Safety Instructions 192443 SVS Nachrichtentechnik CX-12 R Receiver module Max. range (open field): 1000 m 2 V DC, 3.6 V DC
Description
This module evaluates received data of sender CX-12 T od the manual sender SHT-12 C4. The information are given as 4 bit word for further application. As long the valid data is received, the corresponding outputs are active and are switched off instantly on receiving the out signal. An analog signal displays the received value by sender. Each received data packet is activated by sender with extra information e.g. RSSI and supply status. Selectable frequencies (433.62 and 434.22 MHz) together with a special transmission protocol lead to an extremely trouble-free control Coverage possible up to 1000 m depending on places.
Features
- Transmission of 4 digital states and 1 analogue value
- 2-, 4-, 5- and 5-pin rows, grid 2.54mm
- Inputs: 1x analogue: E.g. for reduced supply voltage 1x digital: Setting the frequency 1x digital: Setting the power saving mode 1x digital: Selection of learning and deletion modes
- Outputs: 4x digital: D1 to D4 CMOS 3.3V high active 2x digital: E.g. for controlling LED´s 1x digital: Control of a Piezo disk 1x analogueue: Filtered PWM signal of the received analogue value
- 2 adjustable frequencies
- Safe and low-interference signal transmission
- Radio system with feedback
- Control functions: 4 digital inputs + 1 analogueue input
- Current consumption: Standby 18.2 mA (clocked 1.4 mA) at 3.3V
- Temperature range: -20°C to +65°C.
Scope of delivery
- receiver module
- User manual.
Hints
No antenna included.
Suitable transmitters and modules - see optional accessories.
The free-field range is only achieved under optimum conditions.
Caution: SH-7 Series products are not compatible with SH-12 Series products.