Water ID PoolLab 1.0 Photometer Photometer Chlorine, Alkalinity, pH, Oxygen, Cyanuric acid, Bromide, Chlorine dioxide, O

Photometer Pool-Lab for professional water analysis in private swimming pools and SPAS
With this tester you can quickly and accurately measure the 11 most important pool water parameters.
The operation of the PoolLAB is very simple.
The integrated but replaceable cuvette allows quick sampling by simply immersing the waterproof PoolLab (IP68) in the water.
Then press the 0 buttons to perform the zero adjustment (only 1x required for each measurement series).
A reagent tablet is crushed in the cuvette with the plunger and completely dissolved.
After pressing the button for the corresponding parameter, the result appears on the display within seconds.
Via Bluetooth, the tester can connect to a software and/or app on your mobile phone. The measured values can be saved and printed out and dosing recommendations of water care products can be entered.

With PoolLAB, the following key values can be measured:

• pH 6.50 - 8.40
• Chlorine (free/bound/total) 0.00 - 6.00 mg/l (ppm)
• Alkalinity (acid capacity) 0 - 300 mg/l (ppm)
• Cyanuric acid (stabilizer) 0 - 160 mg/l (ppm)
• *Active Oxygen (MPS) 0.0 - 30.0 mg/l (ppm)
• **Brom 0.0 - 13.5 mg/l (ppm)
• **Chlorine dioxide 0.00 - 11.40 mg/l (ppm)
• **Ozone 0.00 - 4.00 mg/l (ppm)
• *Hydrogen peroxide LR 0.00 - 2.90 mg/l.

*requires tablets not included in the base kit.
**requires Glycine tablets if chlorine is present in the measuring water. Glycine tablets are not included in the basic kit and must be ordered separately

This text is machine translated.