Chauvin Arnoux C.A 6133 Electrical tester VDE standard 0100

The installation testers C.A 6131 and C.A 6133 are intended to test the safety of electrical installations: For new installations before commissioning, for existing installations even during operation, and to locate faults.
Especially for test services, the portable devices are easy to use, highly efficient and comply with the applicable standards.

The operation of the C.A 6133 is easy. Each control element on the front side has only one function. Its ergonomics have been developed for simplified operation under all conditions.

For reliable measurements, the C.A 6133 is equipped with a compensation function for measuring leads. The tester can be used to measure the voltage, resistance, resistance and insulation of loops and current using an external clamp. The C.A 6133 also shows the direction of the rotating field. Fault current circuit breakers of type A & AC can be tested in ramp or pulse mode.

The test result (OK/not i.O) is immediately displayed on the C.A 6133. The C.A 6133 allows the automatic start of test sequence and storage of their results and thus provides for time savings. This allows you to save a sequence of “Auto Loop - Residual Current Circuit Breaker - MΩ”. By creating test campaigns with up to 6 to 8 consecutive tests, fast work in the field is possible.

With an Android application "IT-Report" designed for electrical systems, the test results can be downloaded via Bluetooth and the measurement report can be created and displayed.

This text is machine translated.