1/3
Counttec ZPA ZPA Electricity meter (3-phase) Digital 60 A MID-approved: Yes 1 pc(s)
EAN:
Part number:
Item no:
Product type
Electricity meter (3-phase)
Current load
60 A
Display
Digital
Calibration
Calibrated
Operating voltage
3 x 230/400 V AC
Datasheet (PDF)
Number
Total (€ 96.63 / piece)
€ 96.63
plus VAT.
Only 6 Piece(s) available
Highlights & Details
Electronic household counter
- Panel mounting
Technical specifications
- Accuracy class: A or B according to EN 50470-1, 50470-3Nominal voltage: UN 3×230/400 V, four-wire connectionReference frequency 50 HzMaximum current (Imax): 60 A.Reference current (Iref): 5 A.Transition current (ITR): 0.5 A.Minimum current (Imin): 0.1 A.Starting current (actual): 15 mACurrent sensor: ShuntType of measured energy: Active energyConnection type (direct or indirect): DirectLCD Control - 6 digit power indicatorEnergy resolution in LCD: 1 kWhEnergy figures are 8 mm highSignaling of the energy flow and its direction: YESIndication of magnetic influence: YES, by means of the status wordIndication of the sealing pin removed from the BKE: YES, by means of the status wordBacklight: YESTemperature range for readable LCD: -40 °C / +70 °C.Rate: 0 or 2Rate control: InternalDate and time: RTCOperating temperature: -40 °C - +70 °CStorage temperature: -40 °C to +75 °C.Insulation of the closed device: Protection class II.Protection class IP 53Resistance to magnetic field of the permanent magnet: Up to 500 MTMechanical environment: M1Electromagnetic environment: E2Maximum humidity: 90 %, without condensationSealing pin - prevents the removal from the BKE: 1Diameter of the opening for the sealing wire: 2.5 mmType of seal: Aluminum or plastic seal
- Product type
Electricity meter (3-phase)
- Current load
60 A
- Display
Digital
- Calibration
Calibrated
- Operating voltage
3 x 230/400 V AC
- Factory colour
White
- Dim
(L x W x H) 93 x 90 x 135 mm
- Weight
400 g
- Starting current
15 mA
- Starting current
15 mA
- Display
6-digit LCD
- Self-consumption
0.6 W
- Own consumption
- Effective power at UN < 0.6 W.- Apparent power at UN < 8 VA- Own consumption in circuits 0.1 VA (at Iref)
- Frequency
50 Hz
- Accuracy class
A/B
- MID-approved
Yes
- Reading type
Active energy
- Nominal voltage range
230 up to 400 V AC
- Mains voltage (max.)
400 V AC
- Mains voltage (min.)
230 V AC
- Width
90 mm
- Height
135 mm
- Length
93 mm
- Current (max.)
60 A
- Current (min.)
0.1 A
- Current range
0.1 up to 60 A
- Type
ZPA
Documents & Downloads
Datasheet
Datasheet 2542995 Counttec ZPA ZPA Electricity meter (3-phase) Digital 60 A MID-approved: Yes 1 pc(s)
User & Safety Instructions
User & Safety Instructions 2542995 Counttec ZPA ZPA Electricity meter (3-phase) Digital 60 A MID-approved: Yes 1 pc(s)
Description
Terminal strip – Connect the measuring device to the mainsThe measuring device is not equipped with a screw terminal strip. The contact of the lines is made using the "contact knives"Which protrude from the rear panel. A mounting and is used as a counterpart during installationContacting device (BKE). It is equipped with a screw terminal for connection to the electrical power supply. Depending on theThe type of adapter can be used as drilled clamps or cage clamps.
This text is machine translated.
This text is machine translated.
Scope of delivery
- Incl. terminal cover